78
VQT2J46
Changing the unit’s settings
(All factory default settings are indicated with underlined text.)
(All factory default settings are indicated with underlined text.)
VHS
Tape Length
Set the length of the tape you are using so the unit can show the
correct remaining time.
[Auto (E-240)]
The unit automatically distinguishes E30, -60,
-90, -120, -180, and -240 tapes.
[E-195]
For E195 tape
[E-260]
For E260 tape
[E-300]
For E300 tape
Playback Colour System
[Automatic]
Differentiates between PAL and MESECAM.
[PAL]
If the PAL system is used.
[MESECAM]
If the MESECAM system is used.
SQPB
To play back video cassettes recorded in S-VHS format (SQPB;
S-VHS Quasi Playback)
[Automatic]
This unit automatically detects the format in
which the recording was made and selects the
same format for playback. However, picture
distortion may occur.
Therefore, set to “On” or “Off”.
[On]
Use this setting when playing back a cassette
tape recorded in the S-VHS format.
[Off]
Use this setting when playing back a cassette
tape recorded in the VHS format only.
Others
Remote Control
Change the remote control code on the main unit and the remote
control (the two must match) if you place other Panasonic products
close together.
[DVD 1]
[DVD 2]
[DVD 3]
Use “DVD 1”, the factory set code, under normal circumstances.
1
Press [
3
,
4
] to select the code (“DVD 1”, “DVD 2” or “DVD 3”)
and press [OK].
To change the code on the remote control
2
While pressing [OK], press and hold the numbered button
([1], [2] or [3]) for more than 5 seconds.
3
Press [OK].
∫
When the following indicator appears on the
unit’s display
The unit’s remote control code
Change the code on the remote
control to match the main unit’s
(
>
step
2
).
Executing “Shipping Condition” in the Setup menu returns the main
unit code to “DVD 1”. Change the remote control code to 1
(
>
step
2
).
Setup
Tuning
Remote Control
Press “
” and “OK” together
for more than 5 seconds on the remote
control.
Disc
Picture
Note
Clock
This unit usually obtains time and date information from digital
broadcasts and automatically corrects the time several times a
day. However, if the time is not set correctly, use the settings listed
in the method below.
1
Press [
3
,
4
] to select “Off” of “Automatic” and press [OK].
2
Press [
2
,
1
] to select the item you want to change.
The items change as follows:
Hour
!#
Minute
!#
Second
!#
Day
!#
Month
!#
Year
^-----------------------------------------------------------------------------------------J
3
Press [
3
,
4
] to change the setting.
You can also use the numbered buttons for setting.
4
Press [OK] when you have finished the settings.
The clock starts.
If a TV station transmits a time setting signal, and when
“Automatic” in the Clock setting menu is set to “On”, the automatic
time correction function checks the time and if necessary it is
adjusted several times every day.
∫
To change the time offset
When the time is not correct, set “Time offset” (from –2h to +2h).
1
Press [
3
,
4
] to select “On” of “Automatic” and press [OK] in
step
1
.
Auto clock setting starts. This takes a few minutes.
“Automatic clock setting completed.” screen is displayed.
2
Press [
1
].
3
Press [
3
,
4
] to select the correct time offset and press [OK].
4
Press [RETURN ].
Standby Settings
≥
Press [OK] to show the following settings.
Power Save in Standby
[On]
It will go into the Power Save in Standby mode
when the unit is in standby mode.
[Off]
It is possible to start quickly from the standby
mode. (Quick Start mode)
[On Timer]
“Power Save in Standby” is set to activate
during the setting time period. (
>
below)
1
Press [
3
,
4
] to select “On Timer” and press [OK].
2
Press [
3
,
4
] to set the start time (hour).
3
Press [
2
,
1
] to select the stop time and press [
3
,
4
] to
set the stop time (hour).
4
Press [OK] when you have finished the settings.
≥
You can also use the numbered buttons for setting.
≥
You can set start and stop time by the hour.
≥
If the clock has not been set, “Power Save in Standby” is
activated at all hours.
Auto Standby
Set the time to automatically turn the unit off.
After the unit has finished operating, the unit will be turned off
once the set time has passed.
[30 minutes]
[1 hour]
[2 hours]
[4 hours]
[6 hours]
[Off]
The unit will not automatically turn off.
Clock
Time
Automatic
Time offset
Date
Auto
Please set clock manually.
OK: store RETURN: leave
OK
RETURN
SELECT
CHANGE
0
: 00 : 00 1 . 1 . 2010
Off
0 9
Number
e.g., This screen appears
while receiving a digital
broadcast.
Time offset
>
below
Note
Power Save in Standby
Power Save
On Timer
To
6 :00
From
0
:00
Saves standby power consumption
by disabling Quick Start function and
AV2 loop-through in standby. Unit's Display
is set to "Automatic".
Press OK to manually set the period of
Power Save.
0 9
Number
OK
RETURN
SELECT
CHANGE
DMR-EX99VEG-VQT2J46_eng.book 78 ページ ２０１０年１月１４日 木曜日 午前１０時３１分
