31
VQT2J46
Ad
van
ced
o
p
erati
o
n
s
Copying from a video cassette recorder
e.g., Connecting to the AV3 input terminals on the front
≥
Turn off the unit and other video equipment before connecting.
≥
Connect to terminals of the same colour.
≥
Refer to “Connecting a television and VCR, digital satellite receiver
or analogue decoder” when connecting to the AV2 input terminals
on the rear panel. (
>
83)
If the audio output of the other equipment is monaural
Connect to L/MONO on the AV3 input terminals at the front.
§
The S VIDEO terminal achieves a more vivid picture than the
VIDEO terminal.
About the aspect when recording a programme (
>
26)
[HDD]
[RAM]
[-R]
[-RW‹V›]
[+R]
[+RW]
[VHS]
Preparation
≥
Press [DRIVE SELECT] to select the HDD, DVD or VHS drive.
≥
Press [REC MODE] to select the recording mode.
≥
When recording bilingual programmes, select “M 1” or “M 2” on the
external equipment
(
>
26, Notes for recording).
≥
When the output signal from the external equipment is NTSC,
change the “TV System” to “NTSC” in the Setup menu (
>
77).
This unit cannot record NTSC signals to discs that already have
PAL signal recordings. (However, both types of programmes can
be recorded onto the HDD or VHS.)
≥
To reduce noise in input from a video cassette recorder, set “Copy
NR” to “On” in the on-screen menu (
>
68).
≥
Check the time on the unit is correct.
1
While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.
e.g., If you have connected to AV3 input terminals, select “AV3”.
[HDD]
[RAM]
[-R]
[-RW‹V›]
[+R]
[+RW]
Perform step 1 (
>
above).
2
Start play on the other equipment.
3
When you want to start recording
Press [
¥
REC].
Recording starts.
[VHS]
Perform step 1 (
>
above).
2
Press [
1
] (PLAY).
Start playing the video cassette and find the recording start
point.
3
Press [
;
], then press [
¥
REC].
Put the unit in recording standby mode.
4
Start play on the external device.
5
Press [
;
] at the point where you want
to start recording.
To skip unwanted parts
Press [
;
] to pause recording. (Press again to restart recording.)
To stop recording
Press [
∫
].
[HDD]
[RAM]
[-R]
[-RW‹V›]
[+R]
[+RW]
≥
Using Flexible Recording (
>
29), you can record the content of a
video cassette (approx. 1–8 hours) to a 4.7 GB disc with the best
possible quality of recording without wasting disc space.
≥
If it becomes time for a timer recording to start while copying, the
recording will start and the copying will stop.
≥
If video is copied from another piece of equipment to this unit, then
the video quality will be degraded.
≥
[VHS]
It is not possible to record SECAM signal on a video cassette.
L/MONO - AUDIO- R
VIDEO
S VIDEO
AV3 IN
S VIDEO
IN 2
VIDEO
/MONO AUDIO R
L
Audio/Video
cable
S Video
cable
§
This unit
Other video equipment
Connect to Audio/Video output terminals.
Recording to HDD or DVD
Recording to VHS
Almost all videos and DVD-Video on sale have been treated to
prevent illegal copying. Any software that has been so treated
cannot be recorded using this unit.
Note
DMR-EX99VEG-VQT2J46_eng.book 31 ページ ２０１０年１月１４日 木曜日 午前１０時３１分
