Panasonic CS-E12QB4RW, Service Manual

Page: 35 / 106

35
11.2 Outdoor Unit
11.2.1 Select the Best Location

If an awning is built over the unit to prevent direct
sunlight or rain, be careful that heat radiation from
the condenser is not obstructed.

There should not be any animal or plant which
could be affected by hot air discharged.

Keep the spaces indicated by arrows from wall,
ceiling, fence or other obstacles.

Do not place any obstacles which may cause a
short circuit of the discharged air.

If piping length is over the [piping length for
additional gas], additional refrigerant should be
added as shown in the table.
Example: For E12***
If the unit is installed at 10 m distance, the quantity of
additional refrigerant should be 50 g .... (10-7.5) m x
20 g/m = 50 g.
11.2.1.1 Indoor/Outdoor Installation
Diagram
11.2.2 Install the Outdoor Unit

After selecting the best location, start installation
according to Indoor/Outdoor Unit Installation
Diagram.
1 Fix the unit on concrete or rigid frame firmly
and horizontally by bolt nut (ø10 mm).
2 When installing at roof, please consider strong
wind and earthquake.
Please fasten the installation stand firmly with
bolt or nails.
Model A B C D
E12*** 540 mm 160 mm 18.5 mm 330 mm
E18*** 613 mm 131 mm 16 mm 360.5 mm