Panasonic CN-NVD905U - Strada - Navigation System, Operating Instructions Manual

Page: 72 / 118

Preset memory
The station being received can be stored manually under
a selected number. (Manual preset)
Select the frequency, then touch and
hold the number under which you
wish to store the frequency for at
least 2 seconds.

The station being received is stored under the
selected number.
Note:
 It is also possible to search automatically for
receivable frequencies and store them.
 Under FM, 6 channels can be stored for each channel
list (FM1, FM2 and FM3). (18 channels in total)
 The channel list switches as shown below, each time
[Band] is selected.
FM1
FM2 FM3

Select a stored station
Selects the stored station.
Select a station (number) from the
Preset stations.
 The radio switches to the selected station.
Auto preset memory
Search automatically for receivable stations and store
them. (Up to 18 FM and 6 AM stations)
Touch and hold [Auto. P] for at least
2 seconds.

Auto preset mode is engaged and the Auto
preset mode indicator illuminates.

Stations are stored in order of reception quality.

The stored stations are overwritten and updated
every time this operation is performed.

If no receivable stations are found, tuning goes
through the whole frequency range and returns
to the original station.
Note:
 Even in Auto preset mode, station selection and
manual preset can still be used.
 Under FM, [Each] or [All] can be selected to specify
the Auto presetting range.

[Each]: Auto presetting is performed for the displayed
list band (6 channels). The other two lists are
not subject to Auto preset mode.

[All]: Auto presetting is performed for all lists FM1
to 3 (18 channels).

To cancel Auto preset mode
Select [Auto. P].
 Auto preset mode is cancelled.
 Stations stored under Auto preset mode are
cleared.
 The radio returns to the preset station that was
stored before Auto preset mode was engaged.
Disc insert (CD/DVD)
1 Press
.

The Open/Tilt/Eject screen is displayed.
2
Select [Disc].
 The monitor opens.
 If there is a disc inside, it is ejected
automatically.
3
Insert a disc.
Printed side
 The monitor closes automatically.
Note:
 The disc is played automatically after insertion.
 3

{8 cm} discs can only be inserted in a 3

{8 cm} disc
cartridge.

The DVD Hint screen
The DVD Hint screen is displayed when a DVD is
inserted. It presents a simple explanation of DVD
operation.
Check the explanation, then select
[OK].

The DVD Hint screen disappears.
Note:

Once [OK] is selected, the DVD Hint screen will not
be displayed again until the engine stops. It appears
again after the engine is restarted or the key is turned
to ACC ON.
Disc eject (CD/DVD)
1
Select [Disc] on the Open/Tilt/Eject
screen.
 The monitor opens and the disc is ejected.
2
Remove the CD/DVD.

Select [Close] to close the monitor.
 Pressing also closes the monitor.
Play a disc Radio
(continued)
English English
72 73
73 72