Panasonic CN-NVD905U - Strada - Navigation System, Operating Instructions Manual

Page: 34 / 118

Map operations
(continued)
Clear or display route trace

Route trace
The route the vehicle has driven along is marked for up to approximately 125 miles (200 km*). When the distance
driven exceeds 125 miles (200 km*), the route trace is deleted, starting from the earliest recorded.
 The route trace can be cleared and re-displayed, as required.
 The display scale can be switched between 150 ft (50 m*) and 32 miles (50 km*).
* This is the scale when “km” is set as the distance setting (

page 84).
Route trace
Note:
 When route trace is not displayed, the route trace data is not recorded.
Touch [Record] on the Change map
view screen.
 Starts recording a route trace from the current position.
 If “No” was selected in step 3 of the “To clear route trace”
procedure, the route trace that was displayed before it was
cleared is displayed again.
To clear route trace
To display route trace
1
Touch [Map view] on the
current position screen.

The Change map view screen is displayed.
2
Touch [Stop].
3
Touch [Yes] to clear display and
route trace data.
Touch [No] to clear the display
without deleting the route trace
data.
Customize the Destination menu
Three items displayed in the Destination menu can be changed. It is convenient
to set frequently used items on the Destination menu.
1
Touch [Setup] from the
Navigation menu.
2
Touch [Custom Dest. Menu].
3
Touch three items to select them
for inclusion in the Destination
menu.
 Always select three items.
 Touch [Default] to select [Address], [POI] and
[Nearest POI].
4
Touch [OK].
 The selected items are registered to the Destination
menu.
 They are arranged in order of selection, from the left.
English English
34 35
35 34