![background image](http://html.mh-extra.com/html/panasonic/cf-19aduax-m-series/cf-19aduax-m-series_service-manual_270449041.webp)
7-19
7.2.4.
Setting up the Hinge Ass’y
1. Set the 2 Cable Holders.
2. Set the Hinge Ass’y and Cable Hold Plate.
3. Fix the Hinge Ass’y and Cable Hold Plate using the 2
Screws <N17>.
Screws <N17> : DXYN3+J8FNL
■
Assembly of Hinge
<N17>
<N17>
Cable
Holder
Cable
Holder
Cable Hold
Plate
Cable
Hold
Plate
Hinge
Ass'y
Fix.
Tighten
Tighten
If you arrange the Cable
in the
̪
area, you do not
need to use the fixing jig.
Using the fixing jig
when fixing the Hinge
If attached reversely,
the direction of cutting
edge faces the Cable
and this may damage
the Cable. Be careful
of the direction.
Ensure the "C" side comes
to the lower right corner
when viewing from above.
Initial state of Hinge
Screw(N17)
Hinge
<Screw tightening torque>
Screw(N17) :0.8 ± 0.08N·m (
ѳ
8.0 ± 0.8kgf·cm)
Screw(N17)
Avoid running over the rib
and boss to avoid catching
the Cable when the Hinge is set.
Cable Hold Plate
Cable Hold Plate
Cable Hold Plate
S1:
⛘✼
S2:
✢ིߺ
S3:
ࠪࡖࡊࠛ࠶ࠫ
S4:
ຠ⇟⏕
S5:
ߘߩઁ
S1:Insulation S2:Pinching Cables
S3:Sharp Edge S4:Check Parts NO. S5:Others
ోᬺ
CAUTION
Safety work
S3
S2