![background image](http://html.mh-extra.com/html/panasonic/cf-19aduax-m-series/cf-19aduax-m-series_service-manual_270449038.webp)
7-16
■
Assembly of LCD Unit Ass'y - 2
Ensure the edge of the
conductive Tape is not
frayed to avoid short
circuit with the Board.
Details of "A"
LCD Cable
LCD Conductive Tape
EMI Sheet
Wrap around
the LCD Cable
with two or three
rotations and attach.
Before attaching
0~0.5 mm from the
positioning rib end.
0~0.5 mm from
the LCD Frame end
Attach as it comes into contact
with the Steel Plate on the side
surface.
After attaching
Completion
S5
S1:
⛘✼
S2:
✢ིߺ
S3:
ࠪࡖࡊࠛ࠶ࠫ
S4:
ຠ⇟⏕
S5:
ߘߩઁ
S1:Insulation S2:Pinching Cables
S3:Sharp Edge S4:Check Parts NO. S5:Others
ోᬺ
CAUTION
Safety work
After wrapping around the Cable, insert into
the Cabinet. The cushion must come within
±2mm from the center of the rib.
Fold back and twist
around the Cable to
attach.
Apply pressure
on the
attached part.
Attach the remaining
part as twisting around
the Cable. Complete
Match to
the red line.
0
㨪
1mm
Attach the Cushion
as shown.
5~7mm
*Avoid running over
the waterproof rib
of the LCD Front.
Pass the LCD
Cable as below.
Attach the Tape
as below.
Fold the Tape as
below to attach.
Pet Tape
LCD Cable Cushion
LCD Side Cushion Upper
LED PCB
INS Sheet
LCD Side
Cushion Left
Corner
Corner
±1 mm
±1 mm
Corner
±1 mm
Connector edge ±1mm
Insert into the
Connector.
Avoid any stress on the TAB
part of the LCD Module because
the line comes off.
Connector
bottom edge
±1 mm
Insert between the ribs.
LCD Side Cushion Upper
PCB Edge Sheet
Insert between the ribs.
Insert between
Insert between
the ribs.
the ribs.
Insert between
the ribs.
FPC
Tape
Attach firmly to avoid
FPC coming off.
Connector
PCB
Attach firmly
on the Connector.
Insert TS FPC and attach
the Sheet as above.
PET Tape
Attach as covering the PCB.
*Attach the shaded part
firmly to the Plate.
Attach it on the Connector.
Attach it on the Connector.
Attach it on the Connector.
Insert into
Insert into
the Connector.
the Connector.
Insert into
the Connector.
Avoid catching the Speaker Cable.
Avoid running over the Speaker Cable.
S2
S1:
⛘✼
S2:
✢ིߺ
S3:
ࠪࡖࡊࠛ࠶ࠫ
S4:
ຠ⇟⏕
S5:
ߘߩઁ
S1:Insulation S2:Pinching Cables
S3:Sharp Edge S4:Check Parts NO. S5:Others
ోᬺ
CAUTION
Safety work