7-3
7.1.4.
Removing the Touch PAD and Key-
board
1. Remove the Palm Rest Ass'y.
Note:
The Palm Rest Ass'y is firmly fixed with two-sided
tape.
Carefully remove the Palm Rest Sheet not to damage
it.
2. Remove the 4 Screws <N9>.
3. Remove the Keyboard Plate(L) and (R).
4. Lift the far side of the Keyboard and slide it to backward,
and then turn the Keyboard over frontward.
5. Remove the 3 Screws <N1>.
6. Remove the KBD CNT Lid.
7. Disconnect the Keyboard FPC from Connector (CN18).
8. Remove the Keyboard.
9. Remove the TP WP Sheet.
10. Disconnect the Cable from Connector (CN800).
11. Remove the Touch PAD and Click Button Plate.
Screws <N1> : DFHE5025XA
Screws <N9> : DRSB2+5FKK
<N9>
<N9>
<N9>
Keyboard Plate(R)
Keyboard Plate(L)
Palm Rest Ass’y
<N9>
3
1
2
Keyboard
<N1>
KBD CNT Lid
Keyboard
Keyboard
Keyboard
FPC
Connector
(CN18)
Connector
(CN800)
TP WP Sheet
Touch PAD
Click Button
Plate
