7-15
■
Assembly of LCD Unit Ass'y - 1
*Notice
·Affixing load value of the affixed.
20~30N(2.0~3.0Kgf)
LED PCB
Tape
Screw(E36-15)
ԛ
Screw(E36-15)
㽳
LCD Side Cushion Lower 2
LCD Side Cushion Lower
LCD Side Cushion Right
Screw(E36-15)
㽴
Screw(E36-15)
㽲
0~1mm
LED PCB Ass'y
LED PCB Ass'y
LCD Back Cushion
LCD PCB Spacer Ass'y
LED PCB Fix Sheet
LED Thermal Diffushion Plate
LED Thermal Diffushion Plate
<Screw tightening torque>
Screw(E36-15) = 0.16~0.20N·m(1.6~2.0kgf·m)
<Screw tightening order>
Screw(E36-15)
㽲㸢㽳㸢㽴㸢㽵
Insert this between
LCD PCB & LCD Farme.
The form of the left and
the right isn't symmetrical.
Screw the PCB
and the Spacer
together.
Screw the PCB
and the Spacer
together.
Match to the
Match to the
upper end.
upper end.
0~0.5mm
0~0.5mm
Match to the
Match to the
positioning rib.
positioning rib.
0~0.5mm
0~0.5mm
Match to the
upper end.
0~0.5mm
Match to the
positioning rib.
0~0.5mm
Attach.
Attach.
Attach.
Remove the Release Paper
on the back side and attach it.
̪
Asymmetric shape
Attach so the concave
part comes here.
Match to the center
from right and left to
attach ±1 mm.
A
A’
Cross-section
view A-A’
Insert the upper part of
Digitizer Ass'y to the Plate.
Digitizer Ass'y
Digitizer Ass'y
Insert to the Digitizer as
illustrated above to attach.
Fit to the top
edge of Plate.
0
㨪
0.5mm
Attach between the ribs
on the side of Frame.
After inserting the
Connector, slide
the claw to lock.
Digitizer Ass'y
Insulation Sheet
0~1 mm
from PCB edge
0~1 mm
from IC
0~1 mm
from the Tab
Insulation Sheet
Attach the Tape in the middle
between the PCB and Digitizer.
Attach the Tape in the
middle between the
PCB and Digitizer.
