Panasonic CF-19ADUAX M Series, Service Manual

Page: 56 / 100

7-34
<Screw tightening torque>
Screw(N8) = 0.2 ± 0.02N·m (
ѳ 2.0 ± 0.2kgf·cm)
<Screw tightening order>
Screw(N8) =
Ԙ → ԙ
Screw(N19) = Ԙ → ԙ → Ԛ → ԛ → Ԝ
SD-LAN PCB Ass'y
#FFF
Ensure that the Knob is fit
to SW when attaching.
Screw(N8)
Ԙ
HDD Guide HDD Guide HDD Guide
LAN CONN Holder LAN CONN Holder LAN CONN Holder
Attaching the LAN CONN Holder
Slide the hook under Slide the hook under
the Main PCB.
the Main PCB.
Slide the hook under
the Main PCB.
Diagonal view
*Note
Avoid catching between the Connector
and Holder or running over the top.
Insert the FPC into the Main PCB.
Screw(N19) ԛ
Screw(N19)
Ԝ
DIMM Holder
RF SW Knob
Insert the hook. Insert the hook. Insert the hook.
DIMM Holder Ass'y
Screw(N8)
ԙ
Screw(N19)
ԙ
Screw(N19) Ԛ
Screw(N19) Ԙ
Pass the Cable through
the cavity part of Holder.
S1: ⛘✼ S2: ✢ིߺ S3: ࠪࡖ࡯ࡊࠛ࠶ࠫ
S4:
ຠ⇟⏕⹺
S5:
ߘߩઁ
S1:Insulation S2:Pinching Cables
S3:Sharp Edge S4:Check Parts NO. S5:Others
቟ో૞ᬺ
CAUTION
S2 Safety work
Side surface
Ensure that the upper Ensure that the upper
claw and lower claw are
claw and lower claw are
hooked.
hooked.
Ensure that the upper
claw and lower claw are
hooked.
Slide the FPC(Battery) Slide the FPC(Battery)
Ass'y.
Ass'y.
Slide the FPC(Battery)
Ass'y.
Insert the FPC as Insert the FPC as
shown and lock.
shown and lock.
Insert the FPC as
shown and lock.
PCMCIA
Cover Sheet
PCMCIA Smart
Card Sheet
Pressure:
20~30N
(2.0~3.0Kgf)
Attach fitting to the left.
Attach to the DIMM Socket.
0~1mm
0~0.5mm
0~0.5mm
0~0.5mm
EX
PC
0~0.5mm
<Screw tightening torque>
Screw(N41) = 0.2 ± 0.02N·m (
ѳ 2.0 ± 0.2kgf·cm)
<Screw tightening order>
Screw(N41) =
Ԙ → ԙ
Screw(N41) ԙ
FPC(Battery) Ass'y
Gasket(65TSV8-10.5-18)
Screw(N41) Ԙ
Gasket(65TSV4-3-50)