![background image](http://html.mh-extra.com/html/panasonic/cf-19aduax-m-series/cf-19aduax-m-series_service-manual_270449035.webp)
7-13
■
Preparation of LCD Front Case Ass'y
■
Assembly of LCD Front Cabinet/TS Panel Ass'y
Magnet
Magnet Spacer
* Do not use if the protrusion such as
painting lump exists around TS Tape.
(Otherwise, the Touch Screen
operations will be affected.)
Match to the center to attach.
±1mm (Both top/bottom and
right/left sides)
Attach this side to
the Cabinet after attaching.
LCD Front Case Ass'y
Attach to the center of the display surface.
(Use the special attaching machine.)
Protective Film
Touchscreen Panel Ass'y
Dimensional
tolerance: ±0.2
Avoid
Avoid
running over.
running over.
Avoid
running over.
Attach the surface to
Attach the surface to
the LCD Front.
the LCD Front.
Attach the surface to
the LCD Front.
*Notice
Apply the load of 20~30N (2.0~3.0 Kgf) to the Cushions.
Laminate Film
Touchscreen
Laminate Film
Touchscreen
*Remove it parallel to Touchscreen.
TS FPC
Protection Sheet
Match to the edge of TS FPC.
Attach with 0~0.5 mm.
Do not remove
the Release
Paper of the
edge part.
OK
NG
TS Panel Kit
LCD Front Case Ass'y
TS Panel Kit