![background image](http://html.mh-extra.com/html/panasonic/bb-hcm403a/bb-hcm403a_operating-instructions-manual_256281116.webp)
Operating Instructions
116
8.
After you confirm the settings and click [Next>], set E-mail notification and
click [Next>].
•
If you select [Enable], the E-mail Notification When Triggered page is
displayed. Enter the settings referring to page 114–115.
9.
Click [Save] after confirming the settings.
•
The new settings are saved.
•
When finished, "Success!" is displayed.
Note
•
If you click [Save], all buffered images on the internal memory and SD memory
card are deleted.
10.
Click [Go to Trigger page].
•
The Trigger page is displayed.
Note
•
If you set a short interval when transferring images to a cell phone, many E-
mails will be sent, which may lead to a large phone bill. Therefore, we
recommend you to set a long interval. 1 image per minute frequency is
recommended.
•
Motion Detection transfer stops operating until after the camera finishes all
transfers. For example, if the camera transfers 3 images per minute and 6
images in total, Motion Detection will follow the pattern below.
Setting
Description
Disable
•
The camera does not send an E-mail notification when
buffering or transferring images.
Enable
•
The camera sends an E-mail notification (up to 3
destinations) when buffering or transferring images.
Detectable
Detectable
Undetectable
1st
2nd 3rd
4th
5th
6th
120 seconds
A Motion Detection signal is detected.