![background image](http://html.mh-extra.com/html/panasonic/bb-hcm403a/bb-hcm403a_operating-instructions-manual_256281056.webp)
Operating Instructions
56
•
Set up the IPsec policy as below.
9.
Access the camera (see page 11).
•
If you can access the camera, the IPsec setup is complete.
Note
•
In IPsec communications, "IPsec" is displayed on the Top page or the
Single Camera page.
•
If you cannot communicate using IPsec, see page 23 of Troubleshooting
on the CD-ROM.
•
See the Panasonic Network Camera support website at
http://panasonic.co.jp/pcc/products/en/netwkcam/
for IPsec features.
Items
Settings
Protocol
ANY
Source Network
Network address and subnet mask on the LAN side of
the VPN router
Source IP address
A global address on the WAN side of the VPN router
Destination Network
A global address of the camera
Destination IP address
A global address of the camera