manualshive.com logo in svg

Panasonic BB-HCM403A, Operating Instructions Manual, Page: 135 / 184

Share
Download
Panasonic BB-HCM403A Operating Instructions Manual Download Page 135

Operating Instructions

135

5.2

Configuring Multiple Cameras

The Multi-Camera Setup page allows you to configure camera IP addresses and 
camera names to view multiple images on the Multi-Camera page. These 
configurations are required to use the Multi-Camera page. Up to 12 cameras can 
be configured. The Selfcamera is registered at No. 1 by default.

1.

Click [Multi-Camera] on the Setup page.

2.

Click 

Add

.

Note

•

If you click the camera number, the modification page is displayed. The 
camera settings can be modified or deleted here.

•

If you configured multiple cameras, you can change the camera number. 
Select the number, and click [Move].

3.

Set each parameter.

•

Clicking [Cancel] cancels your settings without saving changes.

•

By clicking [Clicking this link, enters this camera’s settings.], the settings 
of the Selfcamera are entered automatically. "--" is displayed as the Port 
No, and the model no. is displayed as the Camera Name.

Summary of Contents for BB-HCM403A

























































































































































































Reviews:

No comments