![background image](http://html.mh-extra.com/html/panasonic/bb-hcm403a/bb-hcm403a_operating-instructions-manual_256281094.webp)
Operating Instructions
94
4.3
Buffering or Transferring Images by Alarm
Signal
You can buffer the camera images, transfer to an FTP server or send E-mails using
alarm as a trigger.
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
Note
•
If you are recording images to the SD memory card, refresh interval slows
down.
•
To buffer/transfer images by alarm signal, an alarm must be connected to the
external I/O (see page 151).
1.
Click [Trigger] on the Setup page.
2.
Click a
No
. to enable buffer/transfer.
3.
Check [Enable Image Buffer/Transfer], select [Alarm 1 or 2] for the trigger,
select [Rising: GND to Open (High).] or [Falling: Open (High) to GND.] and
click [Next>].
•
Click [Delete Buffered Images] to delete images already buffered.
•
Click [Save] to save the settings.
•
Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Note
•
If you click [Save], all buffered images on the internal memory and SD
memory card are deleted.