background image

 

 

P2 WX Adapter Add-on Board (#64007) 

 

This adapter provides a convenient way to add wireless programming and serial communication 

capabilities to the Parallax Propeller P2 microcontroller. The adapter connects a Parallax ESP8266 WX 

WiFi SIP module to any P2 development board with a standard 2x6 way accessory header.  

 

The WX adapter can be connected to any P2 accessory header for serial-over-WiFi communications. For 

wireless programming, look for the P56–P63 header marked with the “RES” logo. 

 

Serial-over-WiFi communications from any accessory header is available with any ESP8266 WiFi SIP 

module firmware version. To add the feature for programming the Propeller 2 wirelessly refer to the 

instructions for upgrading your ESP8266 WiFi SIP module firmware to the latest version. P2 WiFi firmware 

has a drag/drop P2 loader on its self-hosted web page, which will accept a P2 program binary file 

compiled in any language.  

 

Features

 

Connects a Parallax WX WiFi ESP8266 SIP module to the Propeller 2 Accessory Header 

Allows wireless programming when used with an accessory header with the “RES” logo 

Load a binary file created in any P2 programming software to the Propeller 2 over WiFi 

Connect to any 2x6 way accessory header for serial-over-WiFi communication 

Unpopulated pads allow access to all the WiFi module SIP control signals, handy for attaching 

logic probes. 

Golden Egg shaped Access Point (AP) enable pads. 

Specifications

 

10-pin SIP socket with 0.1" spacing for the Parallax WX WiFi ESP8266 SIP Module (#32420S) 

Unpopulated 8-pin SIP through-hole pads with 0.1” spacing for access to the WiFi module PGM, 

DBG, ASC, CTS, RTS, DO, DI and RES control signals 

2x6 female socket with 0.1” spacing compatible with the standard Parallax P2 Accessory sockets 

PCB Dimensions:  1.2 x 1.0 in (30.48 x 25.4 mm) 

Operating temperature: -40 to +185 °F (-40 to +85 °C) 

Copyright © Parallax Inc.

 

P2 WX Adapter Add-on Board (#64007)

v1.0  11/12/2020  Page 1 of 7 

 

Web Store: www.parallax.com 

Tutorials: learn.parallax.com 

Sales: [email protected] 

Tech Support: [email protected] 

Sales: (888) 512-1024 

Educator Hotline: (916) 701-8625 

Office: (916) 624-8333 

Fax: (916) 624-8003 

Summary of Contents for 64007








Reviews: