Panasonic AW-HS50E, Operating Instructions Manual, Page: 24 / 398

23 (E)
1. Basic operations
1-8. Setting the USER buttons
Menu item functions can be assigned to the USER 1[3]
button and USER 2[4] button for use later.
Up to four functions can be assigned from USER1 to
USER4.
75'4 2KP22TGUGV
75'4
75'4
75'4
(/'/5GNGEV (/'/
#7:6Q(/'/ 4X1HH^':10
(/'//QFG /#WVQ^':10
=?75'4(/'//GPW
The functions registered in [USER1] and [USER3] are
assigned to the USER 1 button, and the functions registered
in [USER2] and [USER4] are assigned to the USER 2
button.
While the SHIFT button is held down, the function registered
in [USER3] or [USER4] can be selected.
The button indicator is lit when the functions assigned to
the button are enabled, and it is off when the functions are
disabled.
Each time a USER button is pressed, its functions are
switched between enabled and disabled.
The following functions can be assigned to the USER buttons (USER 1 and USER 2).
No. Item Function
1 PinP Preset This item can be set in the [USER1] only.
When it is set, [USER1] to [USER4] can all be used for calling the data in the PinP preset memories.
2 WIPE Preset This item can be set in the [USER1] only.
When it is set, [USER1] to [USER4] can all be used for calling the data in the WIPE preset memories.
3 PinP PVW The PinP image is output to the PVW image.
4 KEY PVW KEY is output to the PVW image.
5 GPI Input The GPI input is enabled or disabled.
6 GPI Output The GPI output is enabled or disabled.
7 CamCont Link Link control with the AW-RP50 is set to ON or OFF.
8 AUX Transition The AUX transitions are enabled or disabled.
9 PinP Transition The PinP transitions are enabled or disabled.
10 EFFDSLV Effect dissolve is enabled or disabled.
11 StrFMEM1 The images of the AUX bus are imported into the frame memory (FMEM1).
12 StrFMEM2 The images of the AUX bus are imported into the frame memory (FMEM2).
13 No Asign No item assigned
Even when functions have been assigned to the USER button, the assigned functions will be disabled in the following situations,
and direct operations using the USER buttons and OSD/TIME dial will be enabled.
 
When the chroma key marker is displayed
 
When the submenu [2] WIPE Menu is displayed
 
When the submenu [3] PinP Menu is displayed
 
When the submenu [5] KEY Adjust Menu is displayed

Refer to “2-5-6. Direct operations using the USER buttons and OSD/TIME dial” (<Basics> Operating Instructions).