Panasonic AVHS400N - MULTI FORMAT LIVE SWITCHER Operating Instructions Manual Download Page 68

Page: 68 / 98

4. Input/output signal settings

4-8. Setting the on-screen display (OSD)

The menu screen is superimposed on the preview output or multi view display output for display.

Press the [FUNC] button to light its indicator, and press the [IN/OUT] button to display the IN/OUT menu.

Turn [F1] to display the OSD sub menu.

<Menu display>

OSD

Select

5/11 On PVW

Off Multi

Turn [F] to set whether to display the OSD using the OSD item.

On: OSD is displayed.

Off: OSD is not displayed.

This function can be assigned to a user button.



See 5-3-1.

Turn [F3] to set the output destination using the Select item.

PVW: The menu screen is superimposed onto the preview output, and output.

Multi: The menu screen is superimposed onto the multi view display output, and output.



When On is selected as the OSD item setting, the multi view display split frame and tally information are not

displayed on the monitor.



Examples of OSD displays

Input

1/11
Output

2/11
Ref

3/11
OutPhs

4/11
OSD

5/11

[IN/OUT]

[BKGD PATT]

[KEY PATT]

Signal

IN1
Signal

OUT2
Sync↓



BBST

System

1H
OSD

On
Output

PVW
BBSetup

-
H-Phase

0
Select

PVW

Mode↓



Normal

GenLock

UnLock
V-Phase

AnaGain

This indicates the wipe pattern for the background
transition.

This indicates the wipe pattern for the
key transition.

“>” appears to the left of the selected menu.

Summary of Contents for AVHS400N - MULTI FORMAT LIVE SWITCHER



































































































Search results

Summary of Contents for AVHS400N - MULTI FORMAT LIVE SWITCHER

Reviews:

Related manuals for AVHS400N - MULTI FORMAT LIVE SWITCHER

Brands by name

Popular brands

Panasonic AVHS400N - MULTI FORMAT LIVE SWITCHER, Operating Instructions Manual

Search results

Summary of Contents for AVHS400N - MULTI FORMAT LIVE SWITCHER

Reviews:

Related manuals for AVHS400N - MULTI FORMAT LIVE SWITCHER

Brands by name

Popular brands