51
3. Basic operations
RECALL: This is used to recall the preset memory data and change the panel settings.
1
On the MEMORY menu, turn [F1] to display the PSMEM sub menu.
2
Turn [F], select “Recall” using the Mode item, turn [F3], and set the preset memory number using the
NO.Sel item.
3
Turn [F4] to select whether to call the crosspoint selection status using the XPT item.
Enable: The data stored in the preset memory is used.
Disable: The data stored in the preset memory is not used, and the settings prior to recall are retained.
4
Press the [F5] switch (Exec) to clear the content.
CLEAR: This is used to clear contents in the preset memory.
1
On the MEMORY menu, turn [F1] to display the PSMEM sub menu first.
2
Turn [F], select “Clear” using the Mode item, turn [F3], and set the preset memory number using the
NO.Sel item.
3
Press the [F5] switch (Exec) to clear the content.
