Panasonic AVHS400N - MULTI FORMAT LIVE SWITCHER Operating Instructions Manual Download Page 67

Page: 67 / 98

4. Input/output signal settings

Press the [FUNC] button to light its indicator, and press the [IN/OUT] button to display the IN/OUT menu.

Turn [F1] to display the Multi sub menu.

<Menu display>

Multi

Split

Char

Pos

Signal

6/11 10SPL-A On 1 PGM

10SPL-B
4SPL
8SPL-A
8SPL-B

Off 1~8 IN1~8

FMEM1
FMEM2
CBGD

Turn [F] to select the display mode using the Mode item.

Turn [F3] to set whether to display the name of the material using the Char item.

ON: The name of the material is displayed under the sub-screen.

The “!” mark appears in front of the name of the material when no signals are input or signals with a
different format are input.

OFF: The name of the material is not displayed.

If, however, the menu and the name of the material are selected for the OSD display, the menu display takes
priority, and the name of the material is not displayed.

Select the position (

in the figures) using the Pos item, and turn [F4] to set the name of the signal

using the Signal item.

Different settings are stored for 10SPL, 4SPL and 8SPL.

IN1-8 is the default setting for Pos1-8 in any of the modes.

Summary of Contents for AVHS400N - MULTI FORMAT LIVE SWITCHER



































































































Search results

Summary of Contents for AVHS400N - MULTI FORMAT LIVE SWITCHER

Reviews:

Related manuals for AVHS400N - MULTI FORMAT LIVE SWITCHER

Brands by name

Popular brands

Panasonic AVHS400N - MULTI FORMAT LIVE SWITCHER, Operating Instructions Manual

Search results

Summary of Contents for AVHS400N - MULTI FORMAT LIVE SWITCHER

Reviews:

Related manuals for AVHS400N - MULTI FORMAT LIVE SWITCHER

Brands by name

Popular brands