Panasonic AVCCAM AG-HMC41E Operating Instructions Manual Download Page 113

Page: 113 / 122

113

Reference

Recording

Cannot record even

through the SD Memory

Card is inserted correctly.

Is the write-protect switch on the SD Memory Card in the “LOCK”

position? The card cannot be recorded to if the switch is in the

“LOCK” position.

Is the remaining memory available on the SD Memory Card

extremely low? Please save contents onto different media and

delete unneeded data from the card, or use a new card instead.

Has the SD Memory Card been correctly formatted? Alternatively, is

the card of a format that is incompatible with this camera? Reformat

the card with the camera.

8 MB – 16 MB SD Memory Cards cannot be used for video

recording.

•

P37

P35

Recording stops by itself.

Is your SD Memory Card compatible with use for video recording?

Always use an SD Memory Card compatible with use for video

recording.

•

Editing

Cannot read the data on the

SD Memory Card.

Make sure the SD Memory Card is formatted correctly.

If it is not, format the card in the unit.

•

P35

Cannot perform nonlinear

editing.

Check the specifications of your computer and connecting cable.

•

P85

Cannot dub onto an

external device.

Make sure the external device is connected correctly.

•

P83

Displays

Something is wrong with

the time code display.

The time code display may not register a regular count if a clip is

played in the reverse slow mode. This is normal.

•

—

Playback

Cannot play even when I

press the play button.

Make sure the PB lamp is on.

Lower the POWER switch to turn the PB lamp on.

Is the playback format correct?

Make sure the playback format on the camera matches the

recording format for the clip.

•

P70

P73

Mosaic-like noise appears

when I cue or review a clip.

This noise is inherent to digital video technology. This is normal.

•

—

Images do not appear on

the television even though

I have connected the

camera-recorder properly.

Make sure the input selector on your television is set to video input.

Read the television’s instructions carefully and select the correct

video input connector for the camera-recorder.

•

—

Cannot hear any sound

from the camera-recorder’s

speaker.

You may have turned down the camera-recorder’s volume control

too far.

Adjust the volume using the + zoom button.

•

P71

(Continued on the next page)

Summary of Contents for AVCCAM AG-HMC41E



























































































































Search results

Summary of Contents for AVCCAM AG-HMC41E

Reviews:

Related manuals for AVCCAM AG-HMC41E

Brands by name

Popular brands

Panasonic AVCCAM AG-HMC41E, Operating Instructions Manual

Search results

Summary of Contents for AVCCAM AG-HMC41E

Reviews:

Related manuals for AVCCAM AG-HMC41E

Brands by name

Popular brands