background image

6

Shooting photos (continued)

Setting the aspect ratio / recording 

pixels

You can select an aspect ratio based on the your 
intended print or playback method. In addition, the 
higher the recording pixel setting, the sharper your 
printed images will appear.
Set the aspect ratio with the ASPECT RATIO item 
in the setting menu PICTURE screen.
Set the recording pixels with the PICTURE SIZE 
item in the setting menu PICTURE screen.

Recording pixels

Aspect ratio

Recording pixels

4:3

350×640
364×448

 

560×190

640×480

3:

3984×656
364×176
59×178

16:9

44×376
338×187
560×1440

If you set the aspect ratio to 4:3 or 3:, black 

bars will appear on the left and right edges of the 

screen.

When you print photos recorded with this camera 

in 16:9 aspect ratio, the edges may be cut off. Be 

sure to check beforehand when printing at a store 

or with other printers.

The recording pixel settings that are available 

vary depending on the selected aspect ratio.

Recording may take longer with higher recording 

pixel settings.

The maximum zoom ratio is x 1.

Setting the picture quality

You can select the quality for recorded pictures.
Set the picture quality with the QUALITY item in 
the setting menu PICTURE screen.

 : Record photos with high image quality.
 :  Prioritize quantity, and record photos with 

standard image quality.

When shooting with QUALITY set to 

photos may appear blurry depending on the 
subject.

Summary of Contents for AVCCAM AG-HMC41E



























































































































Reviews: