3
Preparation
Power sources
Using the battery
Installation
Insert the battery until it clicks into place.
ヱャ
ヲヶリヤレチヴヵモンヵ
ヱラヰヵヰ
ヤモヮユンモ
Removal
1
Set the POWER switch to OFF, and check
that the mode lamp is off.
2
Remove the battery while pressing the
battery release button.
Support the battery with your hand to ensure
that it will not fall.
ヱャ
ヱヰヸユン
ヲヶリヤレチヴヵモンヵ
ヱラヰヵヰ
ヤモヮユンモ
Mode lamp
Battery release button
•
Using the AC adapter
Installation
1
Connect the DC cable to the AC adapter.
2
Plug the AC power supply cable into the
power outlet.
3
Insert the DC cable’s battery connector until
it clicks into place.
2$
1((
10/
1&'
219'4
37+%-56#46
2*161
%#/'4#
#8176
%1/210'06
176
%#/4'/16'
<11/55
(1%75+4+5
DC cable’s battery
connector
Removal
1
Set the POWER switch to OFF, and check
that the mode lamp is off.
2
Remove the DC cable’s battery connector
while pressing the battery release button.
3
Disconnect the AC power supply cable from
the power outlet.
Battery cannot be recharged when the DC
cable is connected to the AC adapter.
CAUTION:
Disconnect the AC power supply cable from the
power outlet when the unit is not going to be used.
•
•
