Panasonic AV-HS6000 Operating Manual Download Page 28

Page: 28 / 173

– 28 –

Chapter 3 Part Names and Functions — Menu Panel AV‑HS60C3

Display position

Display content

Upper left

Images selected in the DISP bus are displayed.

Upper right

The WFM (waveform monitor) or VECTOR (vectorscope) for the video selected in the DISP bus is displayed.

Bottom

The menu will be displayed.

<WFM VECT> button

Each time the button is pressed when the menu display is split, the WFM (waveform monitor) and VECTOR (vectorscope) displayed at the upper
right of the screen are switched.

Rear panel

<CONTROL PANEL> terminal (connector: DVI‑D/signal: independent signal)

Connects the Control Panel AV-HS60C1/AV-HS60C2.

This is the dedicated interface for connection with the Control Panel AV-HS60C1/AV-HS60C2 (optional). Do not connect with DVI output devices.

Summary of Contents for AV-HS6000














































































































































































Search results

Summary of Contents for AV-HS6000

Reviews:

Related manuals for AV-HS6000

Brands by name

Popular brands

Panasonic AV-HS6000, Operating Manual

Search results

Summary of Contents for AV-HS6000

Reviews:

Related manuals for AV-HS6000

Brands by name

Popular brands