– 48 –
Chapter 5 Basic Operations — Wipe
Wipe
Selecting the wipe pattern for background transition
Set the wipe pattern for background transition.
1
Select the <ME1>/<ME2> button
→
[BKGD]
→
[BKGD Pattern] tab.
2
Set an item in [Pattern] in the [BKGD Pattern] column.
f
Select the wipe pattern for background transition.
r
Wipe pattern screens for background transition
Selecting the wipe direction
Press a wipe direction selection button to select the wipe direction for the background transition.
For details, refer to “Transition area” (page 23).
r
Fader lever operations and wipe directions (when WIPE: 7 is selected as a wipe pattern)
A B
B
A
B
A
B
A
B A
A B
A B
A B
<N> button
<R> button <N/R> button
Wipe decorations (border, soft effect)
Add a border effect or soft effect to the wiping of background transitions.
1
Select the <ME1>/<ME2> button
→
[BKGD]
→
[Edge Border] tab.
2
Select an item in [Border] in the [Border] column.
[Off]
Does not add the border effect.
[On]
Adds the border effect.
Summary of Contents for AV-HS6000
