Panasonic AV-HS6000, Operating Manual

Page: 155 / 173

– 155 –
Chapter 10 Specifications — Specifications
Control Panel AV‑HS60C1/AV‑HS60C2
Power supply
AC 100 V to 240 V, 50 Hz/60 Hz
Power consumption
40 W
AV-HS60C2 supports redundant power supply.
indicates safety information.
Control terminal
<MAIN FRAME> terminal Compatible with 100Base-TX and AUTO-MDIX (For Control Panel AV-HS60C1/AV-HS60C2 connection)
f
Connection cable (supplied with AV-HS60C1/AV-HS60C2): LAN cable (CAT5E), straight cable, STP (Shielded Twisted
Pair), 10 m (32.8 ft)
f
Connector: RJ-45
* When connected to the <LAN> terminal, no video will be displayed on the Menu Panel AV-HS60C3.
<MENU PANEL> terminal Used only for the Menu Panel AV-HS60C3
f
Connector: DVI-D
f
Because an independent signal format is used, cannot be displayed on a DVI-D monitor.
f
Cannot be used concurrently with a DVI-D monitor (computer) connected to the <DVI-D> terminal. Select with the
display selector switch.
<DVI-D> terminal Used for displaying menus to the DVI monitor (computer)
f
Connector: DVI-D
f
Monitor resolution: 1366
×
768 compatible monitor
f
Cannot be used concurrently with the <MENU PANEL> terminal. Select with the display selector switch.
<USB> terminal For DVI monitor (computer) menu operation
f
Connector: USB (Type A, female)
f
Cannot be used for the Menu Panel AV-HS60C3.
Display selector switch Switch for selecting <MENU PANEL> terminal or <DVI-D> terminal
<COM1 (M)> terminal RS-422 control terminal
For master connection for controlling external devices
f
Connector: D-sub 9-pin (female), inch screw
<COM2 (RS-232)> terminal RS-232 control terminal
For master/slave connection for controlling external devices
f
Connector: D-sub 9-pin (female), inch screw
f
Switchable by menu
<GPI I/O> terminal GPI IN: 8 inputs, general-purpose, photocoupler sensing
ALARM OUT: 1 output, open collector output (negative logic)
GPI OUT: 10 outputs, selected from general purpose, tally
Open collector output
f
Connector: D-sub 25-pin (female), inch screw
f
Logic is switchable by menu.
ME number 2ME
@ @
NOTE
t
Use with the same segment is recommended for the devices which are connected to the unit. If the unit is connected to the devices whose segments
are different, events dependent upon the settings inherent to the network equipment, for instance, may occur. Thoroughly check the connections with
the devices to which the unit will be connected prior to the start of operation.
Other
Ambient operating temperature 0
°
C to 40
°
C (32
°
F to 104
°
F)
Humidity 10% to 90% (no condensation)
Dimensions (W
×
H
×
D) 980 mm
×
153.4 mm
×
267 mm (38-19/32 inches
×
6-1/32 inches
×
10-1/2 inches) (excluding protrusions)
Mass
AV-HS60C1: Approx. 13.0 k
]
(28.6 lbs.) (excluding accessories)
AV-HS60C2: Approx. 13.9 k
]
(30.6 lbs.) (excluding accessories)
r
For AV‑HS60C1E/AV‑HS60C2E
Inrush current, measured according to European standard EN55103-1, on initial switch-on: 3 A, after a supply interruption of 5 s: 25 A (Each mains
input)