manualshive.com logo in svg

Panasonic AV-HS450E, Operating Instructions Manual

The Panasonic AV-HS450E is a versatile audiovisual switcher designed for professional use. With its state-of-the-art features and intuitive interface, this AV switcher offers seamless operation for live events and broadcasting. Explore its full potential with the Operating Instructions Manual, available for free download from manualshive.com.

Share
Download
background image

152

5. System settings

5-8.  Status displays

5-8-1.  Alarm status displays

The alert status (alarms) for this unit’s power supply and cooling fan are displayed on the LCD.



Press the [SYSTEM] button to light it, and display the SYSTEM menu.

 Refer to “2-1-5. LCD menu area”.



Turn [F1] to display the Alarm sub menu.

 <Menu 

display>

SYS    5|Power  |Fan    |       |       
Alarm   |NoAlarm|NoAlarm|       |       

  Alarm   Alarm

The alert status of the power supplies (mainframe and control panel) is displayed in the Power item.
The alert status of the cooling fan (mainframe) is displayed in the Fan item.

NoAlarm:

 No irregularity

Alarm:

 Irregularity

5-8-2.  Alarm message

A message is displayed on the LCD when an alarm has occurred.

 Alarm message displayed

Type of trouble

Operation

ALARM ! FAN STOP

Cooling fan stopped (mainframe)

The alarm message disappears 
when a menu operation is 
performed.

  Contact your dealer immediately.

ALARM ! MF POWER FAILURE

Power supply voltage drop (mainframe) 

1

ALARM ! MF POWER FAILURE & 
FAN STOP

Power supply voltage drop and cooling fan 
stopped (mainframe)

ALARM ! PANEL POWER FAILURE

Power supply voltage drop (control panel) 

2

ALARM ! PANEL POWER FAILURE & 
FAN STOP

Power supply voltage drop (control panel) and 
cooling fan stopped (mainframe)

ALARM ! PANEL & MF POWER 
FAILURE

Power supply voltage drop (control panel and 
mainframe)

ALARM ! PANEL & MF POWER 
FAILURE & FAN STOP

Power supply voltage drop (control panel 
and mainframe) and cooling fan stopped 
(mainframe)

ALARM ! VER IS DISAGREEMENT
PANEL-Ver[xxxxxxx] MF-Ver[xxxxxxx]

Mainframe and control panel versions do not 
match

It is possible to continue operation 
by holding down [F1], but doing so 
may result in trouble, so contact your 
dealer immediately.

ALARM ! LAN CONNECTION 
ERROR

LAN communication malfunction between 
mainframe and control panel

The message remains displayed 
and no operations can be performed 
from the control panel until the 
trouble is remedied and normal 
operation is restored.

1:

  Use both power system 1 and power system 2 for operating the mainframe.

An alarm will be displayed if AC power is not supplied to both power system 1 and power system 2 or if the power switch is 
at the OFF position.

2:

  An alarm will not be displayed if either one of the two AC adapters connected to the control panel is functioning normally.

Summary of Contents for AV-HS450E
































































































































































































Reviews:

No comments

Related manuals for AV-HS450E

S&C 2000 series Instructions For Field Assembly And Installation preview
2000 series
Brand: S&C Pages: 26
S&C 2000 series Installation And Operation Manual preview
2000 series
Brand: S&C Pages: 37
S&C 2000 series Installation Manual preview
2000 series
Brand: S&C Pages: 28
AMX AVS-OCT-6448-210 Product View preview
AVS-OCT-6448-210
Brand: AMX Pages: 1
Banner PICO-GUARD SFI-D1EDPXT6 Instruction Manual preview
PICO-GUARD SFI-D1EDPXT6
Brand: Banner Pages: 2
Tripp Lite 0SU70032 Quick Manual preview
0SU70032
Brand: Tripp Lite Pages: 3
B&B Electronics UHR304 Quick Start Manual preview
UHR304
Brand: B&B Electronics Pages: 2
G-Force Power Switch G0021 Instruction Manual preview
Power Switch G0021
Brand: G-Force Pages: 2
Black Box IC445A Specifications preview
IC445A
Brand: Black Box Pages: 4
SICK 8026014 Operating Instructions Manual preview
8026014
Brand: SICK Pages: 64
Zigen ZIG-SW42 User Manual preview
ZIG-SW42
Brand: Zigen Pages: 18
Black Box LH8112A Installation And User Manual preview
LH8112A
Brand: Black Box Pages: 132
Dahua C5-MDS Technical Manual preview
C5-MDS
Brand: Dahua Pages: 5
Extron electronics MAV 44 SVA RCA Brochure & Specs preview
MAV 44 SVA RCA
Brand: Extron electronics Pages: 5
Wyrestorm Essentials EXP-SW-0401-H2 Quick Start Manual preview
Essentials EXP-SW-0401-H2
Brand: Wyrestorm Pages: 2
Teltronics SEB NET-PATH Installation And Operation Manual preview
SEB NET-PATH
Brand: Teltronics Pages: 82
Longshine LCS-883R-SW8GD User Manual preview
LCS-883R-SW8GD
Brand: Longshine Pages: 26
Conrad 97 49 18 Operating Instructions Manual preview
97 49 18
Brand: Conrad Pages: 8

Brands by name

Popular brands

Load more brands