116
4. Input/output signal settings
4-4. Setting the DVI output signals
(OUT5 and OUT6 standard outputs and options)
Set the DVI output signals of the OUT5 and OUT6 standard outputs and the DVI output signals if the
DVI/analogue output board (option) has been connected.
Press the [OUTPUT] button to light its indicator
and display the OUTPUT menu.
Refer to “2-1-5. LCD menu area”.
Turn [F1] to display the OUTPUTYY sub menu.
(Y: OUT5, OUT6, A1, A2, B1 or B2)
The output that supports the DVI signal is selected
for Y.
Turn [F2] to display the third menu of DVIOut.
<Menu display>
OUTPUTYY|DVIOut |Mode |Size↓ |Scale↓
| 2/2 |
Dig|
Auto|
Fit-V
Ana XGA
WXGA
SXGA
WSXGA+
UXGA
WUXGA
1080P
Fit-H
Full
Turn [F3] to select the signal system using the Mode
item, and press the [F3] switch to enter the selection.
Set this when the DVI/analogue output board
(AV-HS04M5) has been connected.
Dig:
DVI digital signals are output from the DVI connector.
Ana:
DVI analogue signals (RGB) are output from the DVI connector.
When “Ana” has been selected, the display position of the image may be off depending on the
monitor which is connected. If it is off, adjust the position at the monitor.
For details on the adjustment method, refer to the operating instructions of the monitor.
Turn [F4] to select the resolution of the images to be output, and press the [F4] switch to enter the selection.
Auto:
The equipment information of the output destination is captured by the DVI signals, and the
images are output at the optimum resolution.
(The vertical frequency is 60 Hz, and the maximum resolution is SXGA for analogue output
signals and WUXGA for digital output signals.)
If the equipment information cannot be captured or if the resolution and frequency which can
be output by the product are not contained in the equipment information, the images will be
output at the XGA setting.
XGA:
The images are output at the 1024
768 resolution and 60 Hz frequency.
WXGA:
The images are output at the 1280
768 resolution and 60 Hz frequency.
SXGA:
The images are output at the 1280
1024 resolution and 60 Hz frequency.
WSXGA+:
The images are output at the 1680
1050 resolution and 60 Hz frequency.
(This can be selected only when digital signals are output.)
UXGA:
The images are output at the 1600
1200 resolution and 60 Hz frequency.
(This can be selected only when digital signals are output.)
WUXGA:
The images are output at the 1920
1200 resolution and 60 Hz frequency.
(This can be selected only when digital signals are output.)
1080P:
The images are output at 1920
1080/59.94 Hz or 1920
1080/50 Hz resolution.
(The vertical frequency is the same as that of the system format. Only OUT5 and OUT6 can
be selected.)
