Panasonic AV-HS04M7D, Operating Instructions Manual

Page: 47 / 328

56 (E)
ENGLISH
Menu
Sub menu
Parameter 1 Parameter 2 Parameter 3 Parameter 4
Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
SYSTEM
(When locked)
(Message) Parameter
The SYSTEM menu is locked.
Display only
SYSTEM
(When unlocked)
SYS 1 Parameter Mode
↓
HiRes
↓
16:9SQ
Format Setting range

1080/59.94i, 1080/50i, 1080/24psf,
1080/23.98psf, 720/59.94p, 720/50p
— —
Default value 1080/59.94i — —
SYS 2 Parameter Mode
↓
3DFormat Setting range 2D, 3D
Default value 2D
SYS 3 Parameter System H-Phase V-Phase
OutPhs Setting range 0H, 1H –1375 to +1374 –100 to +100
Default value 1H 0 0
SYS 4 Parameter Sync
↓
BBSetup GenLock
Ref Setting range

BBST, BBAD,
TRI, INT
0IRE, 7.5IRE Locked, UnLock
Default value BBST 7.5IRE —
SYS 5 Parameter PGM PVW MV AUX
Anci Setting range On, Off On, Off Off, PGM, PVW On, Off
Default value Off Off Off Off
SYS 6 Parameter Power Fan
Alarm Setting range Alarm, NoAlarm Alarm, NoAlarm
Default value Display only Display only
SYS 7 Parameter Init
↓
F Init
↓
Initial Setting range
Default value
SYS 8 Parameter IP Address Save
↓
NetWork1 Setting range 0 to 255 0 to 255 0 to 255 0 to 255
Default value 192 168 0 10
SYS 9 Parameter Subnet Mask Save
↓
NetWork2 Setting range 0 to 255 0 to 255 0 to 255 0 to 255
Default value 255 255 255 0
SYS 10 Parameter MAC Address
NetWork3 Display only
SYS 11 Parameter Year Month Date Set
↓
Date Setting range 2000 to 2099 1 to 12 1 to 31 —
Default value — — — —
SYS 12 Parameter Hour Minute Second Set
↓
Time Setting range 0 to 23 0 to 59 0 to 59 —
Default value — — — —
SYS 13 Parameter Select Version SysVer
MainVer Setting range MFSoft, PnlSoft,
PnlFPGA, CntFPGA,
In1FPGA, In2FPGA,
M/EFPGA,
OutFPGA Version number Version number
Default value MFSoft
SYS 14 Parameter Select Board Version
OptVer Setting range SLOTA, SLOTB SDI-IN, Ana-IN,
DVI-IN, DVID-IN,
SDI-OUT, 3D-OUT,
Ana-OUT, D/A-OUT,
Csit-IN, None Version number
Default value SLOTA
Setting menu table