Panasonic AK-UCU600P Operating Instructions Manual Download

Page: 9 / 136

Introduction

- 9 -

Introduction

How to View This Manual

About trademarks and registered trademarks

● Microsoft

, Windows

7, Windows

8, Windows

8.1, Windows

10, Internet Explorer

, ActiveX

and DirectX

are

either registered trademarks or trademarks of Microsoft Corporation in the United States and other countries.

● Apple, Mac and OS X are registered trademarks of Apple Inc., in the United States and other countries.

●

Intel

and Intel

Core™ are trademarks or registered trademarks of Intel Corporation and its subsidiaries in the United States and

other countries.

● SDXC logo is a trademark of SD-3C and LLC.

● Other names of companies or products in this manual are either registered trademarks or trademarks of their respective owners.

About copyright

Distributing, copying, disassembling, reverse compiling, reverse engineering and also exporting in violation of export laws of the software

provided with this unit are expressly prohibited.

Illustrations and screen displays featured in the manual

● What is shown in the manual’s illustrations and screen displays may differ from how it actually appears.

● The screenshots are used in accordance with the guidelines of Microsoft Corporation.

● Functions which can be used by Windows only are indicated using [Windows].

Summary of Contents for AK-UCU600P









































































































































Search results

Summary of Contents for AK-UCU600P

Reviews:

Related manuals for AK-UCU600P

Brands by name

Popular brands

Panasonic AK-UCU600P, Operating Instructions Manual

Search results

Summary of Contents for AK-UCU600P

Reviews:

Related manuals for AK-UCU600P

Brands by name

Popular brands