Picture monitor (PM)
-
31
-
Status displays
From the IRIS display screen, press the [CHARA] button of the ROP to display the “status display screen”.
However, when the “IRIS LEVEL” setting is “OFF”, the screen will be displayed first if the [CHARA] button of the ROP is pressed when the
information is not displayed on the picture monitor.
When the “status display screen” appears, pressing the [CHARA] button of the ROP again displays the status screen.
Pressing the [CHARA] button repeatedly switches display through the status screens in the sequence 1/7 → 2/7 → 3/7 → 4/7 → 5/7 → 6/7
→ 7/7 → 1/7 ….
Status display screen
C1 1080/59.94p-240psf
UHD_HDR SCENE1 1500
BT.2020 Z00
EX DZx2 F00
EX x2
F.DROP
OPT_CAM:■■■■■
ND:***** OPT_CCU:■■■■■
CC:***** 15000K CLOSE
A
B
C
K
L
M
N
O
O
O
O
J
I
D
E
F
G
H
A. Camera number
B.
System format
C.
Scene file number
Not displayed when SCENE FILE is set to OFF.
D. Shutter value
E. CCU format information
F.
COLORIMETRY (Y/C conversion coefficient) information
G. Extender information
H. Lens information
I. Zoom position
J. Focus position
K. Optical signal reception status (camera and CCU)
L.
ND/CC filter value
M. Color temperature
N. IRIS F value
O. TALLY INFO
● Set each item to be displayed on the [PM VIEW SETTING] screen that can be accessed by selecting [MAINTENANCE] on the
CCU menu.
● The camera format indicates the format of the signal output from the camera.
● Pressing the [CHARA] button of the ROP from the status display screen displays the “status screen”.
●
TALLY INFO (L)
•
Display the R tally in two segments of the upper row and the R, G, or YL tally in two segments of the lower row.
•
When all R, G, and YL tally signals are ON, the upper row is red, and the left and right segments of the lower row are
green and yellow, respectively.
•
When the R and G tally signals are ON, the upper row is red and the lower row is green.
