61
8. Setting of menu items
Be sure to ask your dealer to carry out the operations described in
this chapter for you.
p
Q Gain: Gain setting for colour difference Q axis
Set the level of the colour difference Q axis for analogue
composite signals output from ANA COMPOSITE OUT.
Selection options: –999 to 999
p
I Gain: Gain setting for colour difference I axis
Set the level of the colour difference I axis for analogue
composite signals output from ANA COMPOSITE OUT.
Selection options: –999 to 999
p
Burst Gain: Burst gain setting
Set the burst level for analogue composite signals output
from ANA COMPOSITE OUT.
Selection options: –100 to 100
p
Stair Gain:
WFM CONT/AUX STAIR signal level setting
Select this to set the level of the STAIR signal to be
output from the WFM CONT/AUX connector.
Selection options: –260 to 290
p
Stair Bal:
WFM CONT/AUX STAIR signal balance setting
Select this to set the balance of the STAIR signal to be
output from the WFM CONT/AUX connector.
Selection options: –430 to 90
ND/CC Name
This menu is used to set the names of the ND filters and CC
filters.
The names set here are displayed for the statuses on the
picture monitor.
Names consisting of up to 4 characters can be set for ND_1
to 5 and CC_A to E.
When the cursor is brought to the “ND/CC Name” menu
title and the jog dial is pressed, the display returns to the
Maintenance menu at the next hierarchical level above.
>
ND/CC Name
>
ND_1 Name 1
ND_2 Name 2
ND_3 Name 3
ND_4 Name 4
ND_5 Name 5
CC_A Name A
CC_B Name B
CC_C Name C
CC_D Name D
CC_E Name E
p
ND_1 Name: ND filter 1 name setting
Select this to set the name of ND filter 1.
A name consisting of up to 4 characters can be set.
Initial value: 1
p
ND_2 Name: ND filter 2 name setting
Select this to set the name of ND filter 2.
A name consisting of up to 4 characters can be set.
Initial value: 2
p
ND_3 Name: ND filter 3 name setting
Select this to set the name of ND filter 3.
A name consisting of up to 4 characters can be set.
Initial value: 3
p
ND_4 Name: ND filter 4 name setting
Select this to set the name of ND filter 4.
A name consisting of up to 4 characters can be set.
Initial value: 4
p
ND_5 Name: ND filter 5 name setting
Select this to set the name of ND filter 5.
A name consisting of up to 4 characters can be set.
Initial value: 5
