39
5. Web settings
Analog Gain
The analogue signal levels are set on this screen.
p
Composite 1:
Composite 1 video gain setting
Select this to set the video level of the analogue
composite signal 1 to be output from the ANA
COMPOSITE OUT 1 connector.
Selection options: –50 to 50
p
Composite 2/PM:
Composite 2/PM video gain setting
Select this to set the video level of the analogue
composite signal 2 to be output from the ANA
COMPOSITE OUT 2/PM connector.
Selection options: –50 to 50
p
WFM:
Waveform monitor video gain setting
Select this to set the video level of the analogue
composite signal to be output from the WFM OUT
connector.
Selection options: –50 to 50
p
Q Gain: Gain setting for colour difference Q axis
Set the level of the colour difference Q axis for analogue
composite signals output from ANA COMPOSITE OUT
connectors.
Selection options: –999 to 999
p
I Gain: Gain setting for colour difference I axis
Set the level of the colour difference I axis for analogue
composite signals output from ANA COMPOSITE OUT
connectors.
Selection options: –999 to 999
p
Burst Gain: Burst gain setting
Set the burst level for analogue composite signals output
from ANA COMPOSITE OUT connectors.
Selection options: –100 to 100
p
Stair Gain:
WFM CONT/AUX STAIR signal level setting
Select this to set the level of the STAIR signal to be
output from the WFM CONT/AUX connector.
Selection options: –260 to 290
p
Stair Bal:
WFM CONT/AUX STAIR signal balance setting
Select this to set the balance of the STAIR signal to be
output from the WFM CONT/AUX connector.
Selection options: –430 to 90