manualshive.com logo in svg

Panasonic AK-HCU3550EA, Operating Instructions Manual

Share
Download
Panasonic AK-HCU3550EA Operating Instructions Manual Download Page 65

65

8. Setting of menu items

Be sure to ask your dealer to carry out the operations described in 
this chapter for you.

PM Operation STAT

This menu is used to set ON or OFF for the operation items 
to be displayed on the picture monitor.
When the cursor is brought to the “PM Operation STAT” 
menu title and the jog dial is pressed, the display returns to 
the Maintenance menu at the next hierarchical level above.

>

 PM Operation STAT 

>

 Status Disp Time    4
 Manual Ope Status
  Master Gain       ON
  Shutter           ON
  Lens EXT          ON
  Filter            ON
  Scene File        ON
  REF LOAD          ON
 Auto OPE Status    ON

p

  Status Disp Time: Status display time setting

Select this to set the length of the status display time.
The time is set in 1-second increments.
When the status of an item that has been set to ON on 
this menu has changed, the new status is displayed on 
the picture monitor for the length of time that was set for 
Status Disp Time.

Selection options: 0, 2, 4

When 0 (zero) is selected, the operations (manual, auto) 
are not displayed on the picture monitor.

p

  Manual Ope Status

 

Master Gain: Master Gain display setting

Select this to set ON or OFF for the status display when 
the master gain status has been changed.

Selection options: ON, OFF

p

  Manual Ope Status

 

Shutter: Shutter display setting

Select this to set ON or OFF for the status display when 
the shutter status has been changed.

Selection options: ON, OFF

p

  Manual Ope Status

 

Lens EXT: Lens EXT display setting

Select this to set ON or OFF for the status display when 
the lens extender status has been changed.

Selection options: ON, OFF

p

  Manual Ope Status

 

Filter: Filter display setting

Select this to set ON or OFF for the status display when 
the filter status has been changed.

Selection options: ON, OFF

p

  Manual Ope Status

 

Scene File: Scene File display setting

Select this to set ON or OFF for the status display when 
the scene file status has been changed.

Selection options: ON, OFF

p

  Manual Ope Status

 

REF LOAD: REF LOAD display setting

Select this to set ON or OFF for the status display when 
REF LOAD has been read.

Selection options: ON, OFF

p

  Auto OPE Status:  Auto function display setting

Select this to set ON or OFF for the status display when 
AWB, ABB or ASU has been executed.

Selection options: ON, OFF

System

This is used to initialize the menu settings.
When the cursor is brought to the “System” menu title 
and the jog dial is pressed, the display returns to the 
Maintenance menu at the next hierarchical level above.

>

 System 

>

 Initialize        NO?

p

 Initialize

The menu settings can be returned here to the factory 
settings using this item.

Selection options: NO?, YES?
After selecting “Initialize”, turn the jog dial to select 
“YES?”, and then press the jog dial to initialize the 
settings.

)

  The settings of the “Date/Time”, “Network” and 

“Version” menus are not initialized.

Summary of Contents for AK-HCU3550EA













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands