Panasonic AJ-RC905P, Operating Instructions Manual

Page: 7 / 16

7
Parts and their functions
Front panel
F CALL button
While this button is held down, the tally lamps of the
camera recorder are made to light.
G TALLY (red) lamp
This indicates the red tally signal which is input to
the TALLY connector.
H TALLY (green) lamp
This indicates the green tally signal which is input to
the TALLY connector.
I WHITE BAL switch
This is used to select the white balance memory.
PRST:
At this setting, the white balance is set to the
preset value (3200K).
Use it when there is not enough time to adjust
the white balance.
O
The preset value can be set on the camera
recorder’s menu to any color temperature.
A or B:
At this setting, the adjusted white balance value
is stored in the memory at the A or B position.
J AWB button
This is used to adjust the white balance
automatically.
It does not work when the WHITE BAL switch
I is
set at the PRST position.
When lighted:
The white balance is now being adjusted.
When off:
The adjustment of the white balance is
completed.
Flashing
5
off:
The white balance adjustment has failed.
K BAR button
This is used to switch the images which are output
to color bar signals.
When lighted:
The color bar signals of the camera recorder are
output.
When off:
The images being shot by the camera recorder
are output.
L ABB button
This is used to adjust the black balance
automatically.
When lighted:
The black balance is now being adjusted.
When off:
The adjustment of the black balance is
completed.
Flashing
5
off:
The black balance adjustment has failed.
M AUTO KNEE button
This is used to set the AUTO KNEE function to ON
or OFF.
When lighted:
The AUTO KNEE function is ON.
When off:
The AUTO KNEE function is OFF.
N GAIN button
This is used to select the gain value of the video
amplifier.
3
: The gain value is increased.
4
: The gain value is reduced.
O SET UP button
This displays the menus of the camera recorder.
When it is lighted, the menus are displayed on the
screen which is connected to the MONITOR
connector.
P SET UP dial
This is used to perform the menu settings.
Turn the dial to select a menu, and press it to enter
the setting.
Menu settings can be performed when the SET UP
button
O is lighted.
If, while the SET UP button is off, the shutter speed
selector dial
R is set to the position, and the
SHUTTER button Q is lighted, the SYNCHRO
SCAN shutter speed can be set.
When the SET UP dial is now turned while keeping
it pushed in, the SYNCHRO SCAN shutter speed
can be changed continuously.
SS
MONITOR CABLE LENGTH
SET UP
(PUSH)
POS2
POS1
POS3
POS4
PRST
POS5 SV
SS POS6
REW FF STOP PLAY
CALL
TALLY
REC CHK START/STOP
GAIN
GAIN
GAIN FILTER
BLACK
R B
PAINTING
ENABLE
AUTO IRIS
CHECK
M.PED KNEE SLOPE
GAMMA
DETAIL
KNEE POINT
IRIS
SHUTTER
WHITE
BAL
ABB
A
B
AUTO KNEE
AWB
VTR WARNING
BAR
VTR
ENABLE
100m 50m
CHROMA
Y/VIDEO
PR
PB
POWER
PGM
RCU CAMERA
INTERCOM
MIC
BBS
PUSH
CHROMA
OFF
OFF
ON
ON
OFF
ON
J O G
I K H F P
( Q )
( R )
N
M
L