10
Rear panel
1
GEN LOCK connectors
The reference signals for synchronizing the whole
system are supplied to these connectors.
2
RET connectors
The return signals which are transmitted to the
camera recorder are supplied to these connectors.
3
CAMERA connector
This connector is connected to the camera adapter
(AJ-CA905G) using the 26-pin cable and used for
communication and transmission.
4
Y, P
B
, P
R
connectors
The analog component signals are output from
these connectors.
<Note>
When the AJ-SDC905 is used as the camera
recorder, video signals can be output to the Y
connector by means of a menu setting.
5
MONITOR connector
The video signals for monitoring purposes are
output from this connector.
6
TALLY connector
This is the input/output connector for the red tally
signal and green tally signal. It can be used for the
picture monitor tally signal, etc.
7
COMMUNICATION connectors
(INCOM IN, INCOM OUT, PGM IN)
These connectors are used to connect the INCOM
(Inter-Communication) system.
Parts and their functions
8
AUDIO OUT connector
The audio signals of the camera recorder are
output from this connector.
9
FUSE
This is the fuse for the unit’s main power supply.
Use a dedicated fuse (250 V, 2.5 A) which is
designed to withstand inrush currents.
:
SIGNAL GND terminal
This is the grounding terminal.
;
AC IN socket
This is connected to the power outlet using the
power cord supplied with the unit.
INCOM IN
PGM IN
FUSE
T2.5AH 250V
AC IN
SIGNAL
GND
GEN-LOCK
RET
Y/VIDEO
INCOM OUT
TALLY
(VJH1247)
COMMUNICATION
CAMERA
AUDIO OUT
PR
PB
MONITOR
VIDEO IN
VIDEO OUT
F
US
E
PUSH
PUSH
PUSH
3
1
2
6
5
4
8
:
;
9
7
Summary of Contents for AJ-RC905P
Page 15: ...Memo ...