background image

2

indicates safety information.

$

THIS APPARATUS MUST BE GROUNDED

To ensure safe operation the three-pin plug must be
inserted only into a standard three-pin power outlet which
is effectively grounded through normal household wiring.
Extension cords used with the equipment must be three-
core and be correctly wired to provide connection to the
ground. Incorrectly wired extension cords can be
extremely hazardous.
The fact that the equipment operates satisfactorily does
not imply that it is grounded, and the installation is not
necessarily safe. For your safety, if in any doubt about
the effective grounding of the equipment or power outlet,
please consult a qualified electrician.

CAUTION:

TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD AND ANNOYING INTERFERENCE, USE
THE RECOMMENDED ACCESSORIES ONLY.

CAUTION:

Do not install or place this unit in a bookcase,
built-in cabinet or any other confined space in
order to maintain adequate ventilation. Ensure
that curtains and any other materials do not
obstruct the ventilation to prevent risk of electric
shock or fire hazard due to overheating.

CAUTION:

TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, REFER CHANGE OF SWITCH SETTING
INSIDE THE UNIT TO QUALIFIED SERVICE
PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 

DO NOT REMOVE COVER (OR  BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to alert
the user to the presence of uninsulated
“dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.

The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (service) instructions in the
literature accompanying the appliance.

CAUTION:

This apparatus can be operated at a voltage in the
range of 100 – 240 V AC.
Voltage other than 120 V is not intended for U.S.A.
and Canada.

CAUTION:

Operation at a voltage other than 120 V AC may
require the use of a different AC plug. Please contact
either a local or foreign Panasonic authorized service
center for assistance in selecting an alternate AC
plug.

WARNING:

O

TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE.

O

TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, KEEP THIS EQUIPMENT AWAY FROM
ALL LIQUIDS-USE AND STORE ONLY IN
LOCATIONS WHICH ARE NOT EXPOSED TO
THE RISK OF DRIPPING OR SPLASHING
LIQUIDS, AND DO NOT PLACE ANY LIQUID
CONTAINERS ON TOP OF THE EQUIPMENT.

CAUTION:

THE AC OUTLET (MAINS SOCKET) SHALL BE
INSTALLED NEAR THE EQUIPMENT AND SHALL
BE EASILY ACCESSIBLE.

CAUTION:

Even when the Power Switch is in the OFF
position, a small current flows the filter circuit.

FCC Note:

This equipment has been tested and found to comply
with the limits for a class A digital device, pursuant to
Part 15 of the FCC Rules.  These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment.  This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful interference to
radio communications.
Operation of this equipment in a residential area is
likely to cause harmful interference in which case the
user will be required to correct the interference at his
own expense.

Warning:

To assure continued FCC emission limit compliance,
the user must use only shielded interface cables when
connecting to external units.  Also any unauthorized
changes or modifications to this equipment could void
the user’s authority to operate it.

Operating precaution

Operation near any appliance which generates strong magnetic fields may give rise to noise in the video and audio signals. If this
should be the case, deal with the situation by, for instance, moving the source of the magnetic fields away from the unit before
operation.

Summary of Contents for AJ-RC905P

















Reviews: