Panasonic AJ-RC905P, Operating Instructions Manual

Page: 8 / 16

8
Front panel
Q SHUTTER button
This enables the operation of the shutter speed
selector dial
R .
When using an electronic shutter, press this button
to light it.
R Shutter speed selector dial
This is used to select the shutter speed.
(SYNCHRO SCAN), SV (SUPER V) or POS
(POSITION) 1 to 6 can be selected as the speed.
When the SHUTTER button
Q is off, the shutter
speed will not change even when this dial is turned.
<Note>
The shutter speed for SV (SUPER V) or POS
(POSITION) 1 to 6 can be set on the SHUTTER
SELECT screen of the OPERATION page.
S PAINTING ENABLE button
This enables color compensation (GAIN dial T and
BLACK dial U ).
When lighted:
Color compensation can be performed.
When off:
Color compensation cannot be performed.
T GAIN dial
This is used to adjust the red (R) and blue (B) gain.
U BLACK dial
This is used to adjust the red (R) and blue (B)
pedestal (black level).
SS
Parts and their functions
V AUTO IRIS button
This is used to set the auto iris function to ON or
OFF.
When lighted:
The auto iris function is ON.
When off:
The auto iris function is OFF (manual
adjustment).
W IRIS dial
When the AUTO IRIS button V is lighted, this adds
or subtracts the value produced by turning the dial
to or from the A.IRIS LEVEL value of the user
menu.
When the AUTO IRIS button
V is off, the iris
adjustment is performed manually.
<Note>
Set the IRIS switch on the lens to the AUTO
position.
X F-number display panel
The f-number of the lens is normally displayed
here.
When the gain or filter is changed, the respective
value is displayed here for about two seconds.
Each time the CHECK button
[ is pressed, the
display changes by one step in the following
sequence: f-number
5
gain value
5
filter No.
5
f-
number.
<Note>
[– – –] appears when the power of the camera
recorder is off.
Y GAIN lamp
This lights when the gain value is displayed on the
f-number display panel
X .
Z FILTER lamp
This lights when the filter number is displayed on
the f-number display panel
X .
[ CHECK button
Each time this button is pressed, the display on the
f-number display panel
X changes by one step in
the following sequence: f-number
5
gain value
5
filter No.
5
f-number.
\ lamp
This lights when the lens extenders (
k
2) are used.
MONITOR
CABLE LENGTH
SET UP
(PUSH)
POS2
POS1
POS3
POS4
PRST
POS5 SV
SS POS6
REW FF STOP PLAY
CALL
TALLY
REC CHK START/STOP
GAIN
GAIN
GAIN FILTER
BLACK
R B
PAINTING
ENABLE
AUTO IRIS
CHECK
M.PED KNEE SLOPE
GAMMA
DETAIL
KNEE POINT
IRIS
SHUTTER
WHITE
BAL
ABB
A
B
AUTO KNEE
AWB
VTR WARNING
BAR
VTR
ENABLE
100m 50m
CHROMA
Y/VIDEO
PR
PB
POWER
PGM
RCU CAMERA
INTERCOM
MIC
BBS
PUSH
CHROMA
OFF
OFF
ON
ON
OFF
ON
T
U
S
W
V
Z Y \
[ X
R
Q