Panasonic AJ-HPX2000 Manual Download

Page: 108 / 113

185

Menu : Menu Description Tables

Note

Please refer to [Setting UMID Information] (page 69) for the
UMID information setting.

The ____ in the Adjustable Range column indicates the
preset mode.

Items/

Data Saved

Adjustable

Range

Remarks

VITC UB
MODE

USER/EXT
TIME
DATE
TCG
FRM RATE
REGEN

Select the user bits mode for VAUX TC
(VITC).

USER/EXT:

If UB MODE is set to EXT, the EXT
value is recorded. If not, USER value
set by UB is recorded.

TIME:

Select local time (hours,
minutes, seconds).

DATE:

Select local date and time (2 last
digits of year, month, date, time).

TCG:

TCG value enters UB.

FRM RATE:

Select camera shoting information
(frame rate, etc.). For more
information, see [

Frame rate

information recorded in user bits

]

(page 60).

REGEN:

Read out value stored in card
and record value continuously.

Note

When the unit operates in 24P, 24PA,
720P, and Native mode, the FRM RATE is
fixed.

– C U F –

TCG SET
HOLD

ON
OFF

ON/OFF switching for the feature that
always starts recording (when the power
is turned ON again) the TCG value that
was set before the power is turned OFF.

– C U F –

FIRST REC
TC

PRESET
REGEN

For the first recording after the power is
turned on, a P2 card is inserted and
then switching from this P2 card to
another recording-target P2 card is
performed, select whether or not to
regenerate the time code as the value
on the new P2 card.

PRESET:

Use the camera-recorder’s internal
time code.

REGEN:

For clips recorded on the recording-
target P2 card, regenerate the time
code as the time code of the clip that
has the most recent date and time.

Notes

Set the date and time accurately. For
guidance on setting, see [

Setting the

Internal Clock’s Date and Time

] (page

62).

During operation in either 24P or
24PA mode, regeneration of the value
of the card recorded in drop-frame is
not permitted.

– C U F –

P.OFF LCD
DISPLAY

ON
OFF

Select whether or not to display the time
code setting and counter indication on
the LCD monitor when the power is
turned OFF.

ON:

Display setting and indication while
the power is turned OFF.

OFF:

Power-down LCD monitor while
camera power is turned OFF.
Setting and indication disabled.

– C U F –

TC OUT

TCG
TCG/TCR

Select the time code to be output to the
time code output connector.

TCG:

Always output time code generator
value.

TCG/TCR:

Display time code generator value
in recording mode, and time code
reader value in playback mode.

– C U F –

Items/

Data Saved

Adjustable

Range

Remarks

TC DISP SEL 30F

24F

Select the display format for the time
code frame digits. (For 1080-59.94i,
720-59.94P or 480-59.94i only

）

For details, refer to

[

Recording time code

and user bits

] (page 58)

30F:

Display time code frame digits in 30
frames.

24F:

Convert time code frame digits into
24 frames for display.

– C U F –

TC VIDEO
SYNCRO

0
1
2
3

For setting to correct the time code
according to the delay of video signals.

Do not correct.

To delay the time code to be input
according to the timing of the video
images.

To forward the time code to be output
according to the timing of the video
images.

To delay the time code to be input and
forward the time code to be output,
respectively, according to the timing of
the video images.

For details, refer to [

Externally Locking

the Time Code

] (page 64).

– C U F –

REC REVIEW
REGEN

ON
OFF

For selecting whether the time code is
regenerated to the value on the P2 card
or not, when subsequent recording
starts after setting the RET SW item on
the SW MODE screen to R.REVIEW
and pressing the RET button on the lens
or the USER button on the unit on which
the RET SW function is assigned.

ON:

The time code is regenerated to

the value on the tape.

OFF:

The time code is not regenerated.

– C U F –

UMID SET/INFO

Items/

Data Saved

Adjustable

Range

Remarks