124
Manipulating Clips with Thumbnails : Setting of Proxy (optional)
By attaching the video encoder card (AJ-YAX800G,
optional) either to the optional slot or Slot 5, it is possible to
specify the proxy recording setting.
The video encoder card is not recognized when inserted if
the power for the unit is turned ON. Insert the video encoder
card after turning off the power for the unit.
Select OPERATION
>
DEVICE SETUP
>
PROXY from
the thumbnail menu to specify the setting.
For the method of installation and the settings of the video
encoder card, refer to the operation manual of the video
encoder card.
Notes
z
To use the proxy function in 24PN (Native) mode, the
FPGA version of the video encoder card firmware must
be updated to [B102] or higher. For the method to
confirm the FPGA version of the video encoder card
firmware, refer to [Video Encoder Card Status Display
(optional)
] (page 130). For instructions on updating, refer
to the P2 support page on the following website.
https://eww.pavc.panasonic.co.jp/pro-av/
z
When “PROXY CARD ERROR” is indicated in the
viewfinder, either check the video encoder card or set
the unit so that proxy recording is not performed.
1
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2
Press the THUMBNAIL MENU button and select
OPERATION
>
FORMAT from thethumbnail menu.
The following screen appears. Select the slot number
for the P2 card you want to format.
Select EXIT if formatting is not required.
3
The following screen appears. Use the cursor buttons
and the SET button to select YES.
4
The selected P2 card is formatted.
Setting of Proxy (optional)
Formatting a P2 Card
AJ-HPX2000P(VQT1D27-5)E.book 124 ページ ２００９年１１月１２日 木曜日 午後８時１４分
