Panasonic AJ-D610WBp, Service Manual

Page: 75 / 363

ELE-19
3-16. VIDEO IN Level Adjustment
BOARD ENCODER
TP VIDEO OUT
ADJUST VR105[RET_LEV]
INPUT Color Bar (GEN LOCK IN)
MODE CAMERA BAR
M. EQ. WFM
SPEC. A = 1V +/- 20mV
1. Supply a composite signal to GEN LOCK IN .
Menu Setting
2. Set [MENU] switch to SET while pressing [SHIFT],
[+], and [-] buttons on the operation panel.
3. Set the menu as shown below.
PAGE: MAIN MENU 3/4 ->
REC (ASPECT)/PB/RET
ITEM: REC SIGNAL: VIDEO
4. Connect a Waveform monitor to the VIDEO OUT ,
and adjust VR105 so that the Level A is in the
specification.
5. Return the MENU as follows.
PAGE: MAIN MENU 3/4 ->
REC (ASPECT)/PB/RET
ITEM: REC SIGNAL: CAM
<NTSC>
<PAL>
3-17. MON ENC Level Adjustment
BOARD ENCODER
TP VIDEO OUT
ADJUST VR103[ENC_LEV],EVR
MODE CAMERA BAR
M. EQ.
WFM
SPEC.
A = 1V +/- 20mV
Menu Setting
1. Set [MENU] switch to SET while pressing [SHIFT],
[+],
and
[-]
buttons on the operation panel.
2. Set the menu as shown below.
PAGE: SERVICE ADJ. 1/2
ITEM: ECU CONNECT : EVR
EVR Setting
Set EVR as shown below.
COM:[1E] DATA:[03] ADR:[00] [Enter]
COM:[1E] DATA:[04] ADR:[00] [Enter]
3. Connect a Waveform monitor to the VIDEO OUT ,
and adjust VR103 so that the Level A is in the
Specification.
4. Return the MENU as follows.
PAGE: MAIN MENU 3/4 -> VIDEO OUT
ITEM: VIDEO OUT SEL: ENC
CHARACTER:
ON
<NTSC>
<PAL>
A
A