Panasonic AJ-D610WBp, Service Manual

Page: 74 / 363

ELE-18
3-14. Monitor SYNC Level
Adjustment
BOARD ENCODER
TP VIDEO OUT
ADJUST VR101[MON_SYNC_LVL]
MODE CAMERA BAR
M. EQ. WFM
SPEC. NTSC : A = 286mV +/- 6mV
PAL : A = 300mV +/- 6mV
Menu Setting
1. Set [MENU] switch to SET while pressing
[SHIFT], [+], and [-] buttons on the operation
panel.
2. Set the menu as shown below.
PAGE: MAIN MENU 3/4 -> VIDEO OUT
ITEM: VIDEO OUT SEL: MONI
CHARACTER
OFF
3. Connect a Waveform monitor to the VIDEO OUT ,
and adjust VR101 so that the Level A is in the
specification.
<NTSC>
<PAL>
4. Return the MENU setting as follows.
PAGE: MAIN MENU 3/4 -> VIDEO OUT
ITEM: VIDEO OUT SEL: MONI
CHARACTER
ON
3-15. Character Level Adjustment
BOARD ENCODER, ENC SUB
TP VIDEO OUT
ADJUST VR401[CHARA LVL]
MODE CAMERA BAR
M. EQ.
WFM
SPEC.
As A level 100%,
B = 55% +/- 5%, C = 10% +/- 10%
Menu Setting
1. Set Menu SW to ON.
2. Connect a Waveform monitor to the
VIDEO OUT
,
and adjust VR401 so that the Level B and C are in
the specification.
A
A
C
B