Panasonic AJ-D610WBp, Service Manual

Page: 68 / 363

ELE-12
3-3. Y Level Adjustment
BOARD ENCODER
TP P1-B48 PIN [Y_26P]
(VFK1194 use)
ADJUST VR2
SW201
F.NUMBER
-
MODE CAMERA BAR
M. EQ. WFM Monitor
SPEC. A = 700mV+/-14mV
1. Connect a 26P connector to other VCR.
2. Confirm the SW201 (26P) is ON .
Menu Setting
3. Set [MENU] switch to SET while pressing [SHIFT],
[+], and [-] buttons on the operation panel.
4. Set the menu as shown below.
PAGE : MAIN MENU 1/4
KNEE LEVEL
ITEM : SET UP 25/50 : 7.5% (NTSC)
5. Adjust VR2 so that the Level A at P1-B48 is in the
specification.
<NTSC>
<Note>
Confirm the SET UP is
7.5% .
<PAL>
<Note>
Confirm the SET UP is
0% .
3-4. SYNC Level Adjustment
BOARD ENCODER
TP P1-B48 PIN (Y_26P)
ADJUST VR1
SW201
MODE
CAMERA BAR
M. EQ.
WFM Monitor
SPEC. A = 300mV+/-6mV
1. Connect a 26P connector to other VCR.
2. Confirm SW201 (26P) is ON .
3. Adjust VR1 so that the Level A a t P1-B48 is in the
specification.
<NTSC>
<PAL>
A
A