Panasonic AJ-D610WBp, Service Manual

Page: 69 / 363

ELE-13
3-5. PR Level Adjustment
BOARD ENCODER
TP P1-B52 PIN (PR_26P)
ADJUST
VR3
SW201, SW1
MODE
CAMERA BAR
M. EQ.
WFM Monitor
SPEC.
NTSC A = 700mV+/-14mV
PAL A = 525mV+/-10mV
1. Connect a 26P connector to other VCR.
2. Confirm the SW201 (26P) is ON .
Menu Setting
3. Set
[MENU]
switch to
SET
while pressing
[SHIFT],
[+], and [-] buttons on the operation panel.
4. Set the menu as shown below.
PAGE : MAIN MENU 1/4
KNEE LEVEL
ITEM : SET UP 25/50 : 7.5% (NTSC)
5. Adjust VR3 so that the Level A at P1-B52 is in the
specification.
<NTSC>
<Note>
Confirm both SW1-1 and SW1-2 is at S side.
<PAL>
<Note>
Confirm both SW1-1 and SW1-2 is at M side.
3-6. PB Level Adjustment
BOARD ENCODER
TP P1-A48 PIN (PB_26P)
ADJUST
VR4
SW201, SW1
MODE
CAMERA BAR
M. EQ.
WFM Monitor
SPEC.
NTSC A = 700mV+/-14mV
PAL A = 525mV+/-10mV
1. Connect a 26P connector to other VCR.
2. Confirm the SW201 (26P) is ON .
Menu Setting
3. Set
[MENU]
switch to
SET
while pressing
[SHIFT],
[+], and [-] buttons on the operation panel.
4. Set the menu as shown below.
PAGE : MAIN MENU 1/4
KNEE LEVEL
ITEM : SET UP 25/50 : 7.5% (NTSC)
5. Adjust VR4 so that the Level A at P1-A48 is in the
specification.
<NTSC>
<Note>
Confirm both SW1-1 and SW1-2 is at S side.
<PAL>
<Note>
Confirm both SW1-1 and SW1-2 is at M side.
A
A