Panasonic AJ-D610WBp, Service Manual

Page: 72 / 363

ELE-16
3-10. Camera SYNC Level
Adjustment
BOARD ENCODER
TP CAM OUT
ADJUST VR200 [ENC_SYNC_LVL]
MODE CAMERA BAR
M. EQ. WFM
SPEC. NTSC A = 286mV +/- 6mV
PAL A = 300mV +/- 6mV
1. Connect CAMERA OUT to a Waveform Monitor
and adjust VR200 so that the level A is in the
specification.
<NTSC>
<PAL>
3-11. Camera Vector Adjustment
BOARD ENCODER
TP CAM OUT
ADJUST VR201[C_LVE] , VC200[QUAD]
VR205[PR_LEV]
VR210[PB_LEV]
F.NUMBER
-
MODE
CAMERA BAR
M. EQ. Vector Scope
SPEC. Each color in inner box
1. Set VR201 at mechanical center position.
2. Connect a Vector scope to the CAM OUT and
adjust VR205, VR210 and VC200 so that the
center of the Vector is located at center of Vector
scope and each color is in the inner box.
<NTSC>
<PAL>
<Note>
Adjust
VR210
for YL-B direction and adjust
VR205
for
R-Cy, and adjust VC200 for inner box position.
Adjust each variable adjustment alternately to get the
best result.
A
VR205
VR210
VR205
VR210