– 41 –
Chapter 3 Recording and Playback — Special recording functions
Special recording functions
When recording to P2 cards, the special recording functions of pre-recording, interval recording, one-shot recording, loop recording, and one-clip
recording can be performed by setting on the setting menu [RECORDING SETUP] screen.
Pre-recording and one-clip recording can be performed in all recording modes, excluding when [VFR] is set to [ON].
Interval recording, one-shot recording and loop recording can be used only in the following setting combinations.
[SYSTEM MODE]
[REC FORMAT]
[CAMERA MODE]
[VFR]
[1080-59.94i]
[AVC-I100/60i]
[AVC-I50/60i]
—
[OFF]
[DVCPROHD/60i]
[60i] or [30P]
[720-59.94P]
[DVCPROHD/60P]
[AVC-I100/60P]
[AVC-I50/60P]
—
[480-59.94i]
[DVCPRO50/60i]
[DVCPRO/60i]
[DV/60i]
[60i] or [30P]
—
[1080-50i]
[AVC-I100/50i]
[AVC-I50/50i]
[DVCPROHD/50i]
—
[OFF]
[720-50P]
[DVCPROHD/50P]
[AVC-I100/50P]
[AVC-I50/50P]
—
[576-50i]
[DVCPRO50/50i]
[DVCPRO/50i]
[DV/50i]
-—
—
Pre-recording
This function enables recording of video and audio from a fixed amount of time (approx. three seconds in HD recording and approx. seven seconds in
SD recording) before recording is actually started.
2SHUDWLRQWRVWDUWUHFRUGLQJ
2SHUDWLRQWRVWRSUHFRUGLQJ
$FWXDOUHFRUGLQJWLPH
3UHUHFRUGLQJWLPH
7LPH
1
Check the settings for each item on the setting menu
[SYSTEM SETUP] screen.
For details, refer to “Special recording functions” (page 41).
For details on menu operations, refer to “Setting menu basic
operations” (page 118).
2
Set the [PREREC MODE] item on the setting menu
[RECORDING SETUP] screen to [ON].
The following is displayed in the special recording display area of the
viewfinder screen (page 77):
Recording in progress
P-REC illuminated
Paused
P-PAUSE illuminated
3
Press the <REC> button.
Video and audio from the fixed amount of time is recorded,
f
In the following instances, pre-recording is invalid and recording
begins from the moment that each operation is performed:
- When the recording format is switched
- When playback moves to recording
- At interval recording
- At one-shot recording
- At loop recording
f
Video and audio from the specific amount of time cannot be
recorded even if recording is started immediately after the thumbnail
display or playback is switched to camera video, the power is turned
on, or the [PREREC MODE] item is changed.
Interval recording
This function enables recording of single frames at the time interval set at the [INTERVAL TIME] item.
IUDPHUHFRUGLQJ
IUDPHUHFRUGLQJ
IUDPHUHFRUGLQJ
7LPH
>,17(59$/7,0(@SUHVHWWLPH
>,17(59$/7,0(@SUHVHWWLPH
1
Check the settings for each item on the setting menu
[SYSTEM SETUP] screen.
For details, refer to “Special recording functions” (page 41).
For details on menu operations, refer to “Setting menu basic
operations” (page 118).
2
Set the [REC FUNCTION] item on the setting menu
[RECORDING SETUP] screen to [INTERVAL].
3
Set the time at the [INTERVAL TIME] item on the setting
menu [RECORDING SETUP] screen.
4
Press the <REC> button.
f
The single-frame recording operation is repeated at the time interval
set at the [INTERVAL TIME] item.
