Panasonic ag-hpx600p Operating Instructions Manual Download

Page: 113 / 178

– 113 –

Chapter 6 Thumbnail Operations for Clips — Thumbnail operations

Example of recording a clip on two P2 cards

Start recording

Recording pause

Clip 1
[COUNT] value

= 0003

Clip 2
[COUNT] value

= 0004

1st card

2nd card

When the thumbnail and property of a clip recorded like the example above is displayed using a P2 device, the thumbnail and [COUNT] value of clip 1
will be displayed.

Initializing the metadata setting

Select [META DATA]

→

[INITIALIZE] from the thumbnail menu, and press the <SET> button. Select [YES] when the confirmation screen is displayed.

The settings under [META DATA] in the thumbnail menu, including uploaded metadata, can be initialized.

Formatting a P2 card

Press the <THUMBNAIL> button.

The thumbnail screen appears on the viewfinder screen.

Press the <THUMBNAIL MENU> button, and select

[OPERATION]

→

[FORMAT] from the thumbnail menu.

When the following screen appears, select the slot number of the P2
card to be formatted and press the <SET> button.

Select [EXIT] when you do not wish to format the card.

When the following screen appears, select [YES] using the

cursor buttons and the <SET> button.

The selected P2 card is formatted.

NOTE

Since data that is deleted by formatting cannot be restored, be

sure to check the data before executing formatting.

Formatting SD memory cards

SD memory cards can also be formatted from the thumbnail screen. With an SD memory card inserted into the camera, perform the following operation.

Press the <THUMBNAIL> button.

The thumbnail screen appears on the viewfinder screen.

Press the <THUMBNAIL MENU> button, and select

[OPERATION]

→

[FORMAT] from the thumbnail menu.

When the following screen appears, select [SD CARD] and press
the <SET> button.

Select [EXIT] when you do not wish to format the card.

When the following screen appears, use the cursor buttons

and the <SET> button to select [YES].

The SD memory card is formatted.

NOTE

SD memory cards can also be formatted from the menu screen.

For details, refer to “Formatting SD memory cards” (page 85).

Since data that is deleted by formatting cannot be restored, be

sure to check the data before executing formatting.

Setting the thumbnail display

The thumbnail display mode can be customized to suit your preferences.

Summary of Contents for ag-hpx600p



















































































































































































Search results

Summary of Contents for ag-hpx600p

Reviews:

Related manuals for ag-hpx600p

Brands by name

Popular brands

Panasonic ag-hpx600p, Operating Instructions Manual

Search results

Summary of Contents for ag-hpx600p

Reviews:

Related manuals for ag-hpx600p

Brands by name

Popular brands