– 133 –
Chapter 7 Menu Operations — Menu list
Item
Description of settings
Remark
P2 BROWSE (OP3)
Sets the P2 browsing function.
f
If [PC MODE] is set to [ON] when OP3 is installed,
the selected item is displayed in blue and cannot
be set.
[ON]
Activates theP2 browsing function.
[ON (
+
CTRL)]
Activates the P2 browsing function, and accepts recording
control of the camera as well as settings of time code and user
bits from the connected device.
[OFF]
Deactivates theP2 browsing function.
indicates factory setting values.
[OTHER FUNCTIONS] screen
Item
Description of settings
Remark
USER FILE
Saves, reads, or initializes user files in the built-in memory of the camera.
[LOAD], [SAVE], [INITIAL]
f
This setting does not affect the items set on the [SCENE FILE] screen.
f
This setting is not available in the following cases:
- The USB device mode is set.
- Clip connection is underway with one-clip
recording.
f
User file includes the setting value of SmartUI.
ACCESS LED
Sets whether to light the access LED of the P2 card.
[ON], [OFF]
REC TALLY
Sets the tally lamp display on the viewfinder.
f
When the [HD SDI REMOTE] item is set to [ON]
and the recording operation control signal is
output superimposing to the HD SDI signal, the
front tally lamp on the viewfinder and the back
and rear tally lamps on the body are illuminated,
regardless of the setting of this item or recording
status of the camera.
[RED]
Illuminates the red tally lamp on the viewfinder during recording
with the camera. The front tally lamp and the back and rear tally
lamps on the body are illuminated.
[GREEN]
Illuminates the green tally lamp on the viewfinder during
recording with the camera. The front tally lamp or the tally
lamps on the body are not illuminated
[CHAR]
During recording with the camera, the tally lamp on the
viewfinder is not illuminated and the recording status is
displayed only with text on the screen. The front tally lamp or
the tally lamps on the body are not illuminated.
f
The screen display for recording always appears regardless of the above
settings.
CLOCK SETTING
Sets the built-in calendar (date and time).
For details, refer to “Setting the date/time of the internal clock” (page 31).
TIME ZONE
Sets the time lag against the Greenwich Mean Time (GMT).
[
−
12:00] ... [0:00] ... [
+
13:00]
For details, refer to “Setting the date/time of the internal clock” (page 31).
f
This setting is not initialized when initialization is
performed with the [INITIAL] item of [MENU INIT]
and [USER FILE].
GL PHASE
Selects the output signal of which phase is to be locked to the signal input to the
<GENLOCK IN> terminal when in the HD (1080i, 720P) mode. (page 71)
f
This setting is not available when the [SYSTEM
MODE] item is set to [480-59.94i], [576-50i], and
[1080-23.98PsF].
[HD SDI]
Locks the phase of HD SDI output signals.
[COMPOSITE]
Locks the phase of the down-converted composite signal.
H PHASE
Adjusts the horizontal phase when locking the phase to the signal to the signal
input to the <GENLOCK IN> terminal.
[
−
512] ... [0] ... [
+
511]
f
Press and turn up or down the jog dial button,
and keep pressing it at the position to change the
value faster.
SEEK SELECT
Selects the position to be cued when the <FF/
)
> or <
%
/REW> button is
pressed while playback is paused.
[CLIP]
Top of the clip
[CLIP&T]
Top of the clip and text memo location
MENU INIT
Initializes all the setting menus including all scene files F1 to F6 and user files
(including settings of SmartUI) to the factory settings.
f
This setting is not available in the following cases:
- The USB device mode is set.
- Clip connection is underway with one-clip
recording.
indicates factory setting values.
