background image

Page 280 

POSTING ON THE PALM.NET SITE. PALM, INC. MAY ADDITIONALLY PROVIDE
NOTICE OF BILLING CHANGES THROUGH YOUR DESKTOP E-MAIL OR
THROUGH THE U.S. MAIL. If any such change is unacceptable to you, you may termi-
nate your subscription to the Service, as provided in Section 5 below. YOUR CONTIN-
UED USE OF THE SERVICE FOLLOWING THE EFFECTIVE DATE OF A CHANGE
TO SUCH FEES AND BILLING METHODS SHALL CONSTITUTE YOUR ACCEP-
TANCE OF SUCH CHANGE.

5.

Term; Termination; Effect of Termination. 

5.1 Obligations. This Agreement shall be effective as of the date when you activate

the Service. This Agreement shall remain in effect until terminated as set forth herein.

Palm, Inc.

 reserves the right, in its sole discretion, to suspend or terminate your access to

and use of Service without further notice if you breach any of the terms and conditions
of this Agreement. Additionally, either you or 

Palm, Inc.

 may terminate this Agreement

at any time without cause by sending notice to the other party.

5.2 Responsibilities. Termination of this Agreement shall not relieve you of any ob-

ligations to pay accrued charges, including any prorated charges accrued for the billing
cycle in which this Agreement is terminated. The payment in advance for the next
month’s service level is nonrefundable.

5.3 Additional Charges. You will be charged for any additional charges beyond the

monthly rates and applicable usage surcharges that have accumulated through the date
of termination of your account, and will be billed for such additional amounts on the
account’s monthly anniversary date.

6.

Links to Other Content. Some Service plans enable access through the Network to

third-party World Wide Web sites and other resources. Neither 

Palm, Inc.

 nor any Venue

Host assumes responsibility for the availability or content of these sites and resources.
Therefore, any concerns that you may have regarding any site should be directed to the
relevant site administrator or webmaster.

7.

Availability of Service. The Service will be available in the United States and in the

District of Columbia, EXCEPT for Alaska, Guam, Hawaii, the Marshall Islands, Mon-
tana, North Dakota, Puerto Rico, South Dakota, Vermont and Wyoming. There will also
be areas within the 44 covered states and District of Columbia where the Service is not
available. Specific coverage information will be available at the Palm.Net Site. If the Ser-
vice is not available within your intended location, you agree that your sole remedy
shall be to terminate this Agreement.

7.1 Compliance with Laws. You shall not use the Service in any manner contrary

to local, state or federal law. 

Palm, Inc.

 expressly disclaims any and all responsibility or

liability for any action by you that is contrary to such law(s) by you and reserves the
right to terminate your Service immediately upon notice for your failure to comply with
any such local, state or federal law.

Summary of Contents for VIIX























































































































































































































































































































Reviews: