Palm Handhelds m100 Handbook Download

Page: 18 / 232

Page 10

Introduction to Your Handheld

To reattach the cover:

■

Align the hinge prongs with the slots on the top edge of your
handheld, and then insert one prong at a time until the prongs lock
inside the slots.

Changing the face plate

You can personalize the appearance of your handheld by changing the
face plate. For information about face plate accessories, visit the web
site

http://www.palm.com

To remove the face plate:

1. Remove the flip cover.

2. Lift the face plate tab slightly to separate it from your handheld

and pull the existing face plate away from your handheld.

Face plate tab

Summary of Contents for Handhelds m100









































































































































































































































Search results

Summary of Contents for Handhelds m100

Reviews:

Related manuals for Handhelds m100

Brands by name

Popular brands

Palm Handhelds m100, Handbook

Search results

Summary of Contents for Handhelds m100

Reviews:

Related manuals for Handhelds m100

Brands by name

Popular brands